It¡¯s just one large decal. I just pulled the backing off and stuck it on. Then used a razor blade to cut out the holes for the pots?
toggle quoted message
Show quoted text
On Mar 26, 2021, at 8:54 AM, Steve Bookout, NR4M <steve@...> wrote:
?
You should have labeled the gain knob to go to ¡®11¡¯. It would make louder!
Seriously thanks for the tip on the labeling.?
Is that one large overlay, or individual ones for each knob?
73 de Steve NR4M?
On Mar 26, 2021, at 9:45 AM, Brian Smith <k9bps@...> wrote:
?
I used Inkscape software. It¡¯s free. There¡¯s a free knob scale plugin for it. Saved that to a .SVG file and emailed it to a local print shop. They printed it to a clear matte material (could have done glossy). I wanted it to look nice
On Mar 26, 2021, at 8:20 AM, n4buq <n4buq@...> wrote:
?
Very nice job, Brian. ?Curious: How did you do the lettering?Thanks,Barry - N4BUQ----- Original Message -----From: "Brian Smith" <k9bps@...>
To: [email protected]
Sent: Friday, March 26, 2021 8:09:19 AM
Subject: Re: [DRAKE-RADIO] Preamp
Thanks! It was an endeavor but I¡¯m pleased with how it turned out. Despite
all my messy wiring inside, it¡¯s very quiet noise wise
Brian Smith
On Mar 26, 2021, at 7:50 AM, Dexter Francis via groups.io
<dwmfrancis@...> wrote:
?Nice Job Brian!
I have a project like this sitting in the ¡°someday¡± que. You¡¯ve given my
motivation a boost.
-df
On Mar 25, 2021, at 10:28 PM, VE7PS <ve7ps@...> wrote:
Nice job Brian! ?Looks like an L-7-PS! ?As a multi Strat player/owner I
get it! Been wanting to re-create a Fender amp someday.
73
Peter
VE7PS
On 2021-03-25 6:23 p.m., Brian Smith wrote:
Pardon me. This isn¡¯t exactly Drake. I just finished my first build from
scratch. A tube bass guitar preamp. Since I love Drake gear, I decided
to make it remotely resemble an AC4 or L4PS. Two 12AX7s and one 12DW7.
Just wanted to share it.
Brian Smith
