I thought a Dinah was a sound card Interface? How do u properly " set up" a Dinah?
On Sat, Jul 1, 2023, 3:45 PM Roger <
roger@...> wrote:
? What OS are you running Echolink/Allstarlink on?? Did you adjust
the TX/Rx levels?
A DINAH is not "plug&play".? It must be properly setup.
N1XP???
On 7/1/23 14:59, Emmanuel Bee wrote:
ICOM-706 MK2G has a 6 PIN DIN connector at
the back of the radio.? It appears from the schematics that
the pins are compatible with the DINAH.
I am using an RPI with Echolink/Allstarlink
software installed. I connected the DINAH to my ICOM-706 MKIIG
and the RPI.? To test the setup, I connected to my RPI node.
It appears the ICOM-706 MK2G is transmitting.? I¡¯ve adjusted
the Squelch on the radio as high as possible to try to
eliminate unwanted noise. This did not resolve the issue.? I
need guidance as to what else I need to set to make the setup
work properly.
?
FYI:? I was able to make the connection
work on a different radio,? Kenwood TM-733A.
?
?
Sent from for Windows
?
--
73 WG8M
