开云体育

All: I'm working on a future story for my newsletter (https://zeroretries.substack.com) about the failed promise of the Icom ID-1 system. Part 1 I'm aware that there were (or still are) "ID-1

All: Thanks for all the help! Now sorted. You can read all about it at https://www.n8gnj.org/2021/07/better-day-id-1.html. Bottom line: One of my three ID-1 radios has a bad (or modified by previous

I got my metric screws at Lowes, yes M4, the reason they only go in a couple of threads is because you have the wrong thread pitch, correct is .7 Thread Per mm The screws I have screw into the radio

Thanks all for the input. Just a quick note here, with more research on your inputs about the bracket tomorrow. After spending 15 minutes at the local Ace Hardware standing in front of the small

Hi Steve, None of my ID-1 radios came with a mobile bracket for the main unit.? Perhaps you could measure the bracket you do have and let us know. Doing some research, the ID-1 user manual lists an

I use a ICOM MB28H on my ID-1

Steve, a bracket from a Yaesu 7900 should work just fine, my other Icom radios are about 1/4" wider, screws are 4 mm x 75mm x .7 thread KF5SMH

As I relate in this blog post - https://www.n8gnj.org/2021/07/frustrating-day-with-the-id-1s.html , I now own three used ID-1s. Two of the three did not come with brackets for mounting the radio. Can

Any updates on a timeframe for release of the new hybrid dual mode DSTAR repeaters?

The service manual for the ID-1 says that you adjust its frequency to spec using some "Adjustment Software". Is this an actual thing?? Where can I get it? (I have the operating software, there does

New Icom D-STAR Repeaters Information | | | | | | | | | | | D-STAR Repeaters D-STAR Infrastructure - Features - Icom America | | | Brochure Attached?

Update - I did a bit of digging on the RSGB Repeater lists website and found out there is a 23cm D-Star system not that far away from here.? GB7NA-A near Barnsley, about 37km north of me (23

Thanks for the reply Jim, I think there may only be one 23cm D-Star repeater operated from the Icom UK HQ in Herne Bay, but that's about 265km from here (just under 165 miles) and I don't think would

Hopefully you will discover some 23cm D-STAR repeaters within RF range. Ideally you’d have access both to DV and DD mode modules. You might also consider building yourself a 23cm D-STAR hotspot.

Hi, I've just ordered an IC-9700 and, although D-Star on 23cm wasn't one of the reasons I decided to get this model, if it's got the capability, I'd like to have a go at using it. I am already on

OK, I'm at a loss here, I have set up my new IC-9700 for DSTAR, and when press the mike key I get the message repeater linked message.? On the IC-92AD after you link, you push the CW button for a few

https://www.icomjapan.com/support/manual/?product=%7CID-1%7C&open=tab2&type=4&business=3#download_result for usb driver https://www.icomjapan.com/support/firmware_driver/2424/ ,software, i hope it

Erik -? Attached is the recent announcement from Icom regarding the new G3 D-STAR repeaters.? 73, Mark, WB9QZB Mark ThompsonEmail: wb9qzb_groups@...

The new updated ID-1 drivers are up there -yes. Are there reports of any new or redesigned repeaters here? We still use DD mode but now only as a backup to our Medical Command mesh. DD mode is fast

All, Have you looked at the ICOM Japan (https://www.icomjapan.com/)?? I was able to update the driver from the site. W6ONT From: <[email protected]> on behalf of Roberto Velasco