开云体育

Since I also had this problem I figured I should post where I found the answer. Do a search for message 803 and follow the instructions carefully. After fighting with this for two weeks it is now

D-STAR 23cm Ops - Thanks for participating in the D-STAR 23cm group. If you're using or experimenting with D-STAR on 23m currently let the group know how you're using D-STAR by sending a message

Yes, been there! I'm able to send my message with every PTT from both the ID-1 and 9100, and I have a number of messages programmed that I switch between when I travel to other areas (location, email

The mounting bracket for the IC-2200H/2300H fits the ID-1 perfectly with no modification necessary, MB-28H $27.95 from Universal radio. Ron N3RWM

Kerry, Thanks for the idea. I had thought of using aluminum angle iron for the 90* brackets. I would think that icom would consider making a piece of bent metal for EVERY production line radio

I used an old Alinco 220 radio mount for ours fits perfect

I took mine to home depot, the roofing section and found a joice hanger that was exactly the right size. Re drilled 8 holes in the hanger (4 for the radio on the sides and 4 to bolt it to the floor)

Suggestions? It would seem that Icom doesn't sell one anymore :( E-Mail Thread To/From Icom regarding ID-1 Mobile Mounting Bracket ----------------------------

Thanks!

1294.3 Buddy WB4OMG

We use 1294.300 in Florida George - W4AQR -------------------------------------------------- Sent: Monday, March 25, 2013 9:27 AM To: <D-STAR_23cm@...> Subject: [D-STAR_23cm] 23cm DV

Anybody know of a defacto standard on 23cm? Like 145.670 is on 2m? 73 de KJ4WLH

Hi Bill, I did some work with Splat for linux a while ago generating a coverage chart here locally. less than 1.58uV was the figure I found, so I rounded up to -100dBm. Have a look at my post from

Is there a standard 'microvolt' signal value for 1.2 GHz DD links that would give reasonable simulations using Radio Mobile Online? For wifi Mesh planning, using this chart

1.2 GHz DD has significantly less coverage than the 1.2 GHz DV mode. The signal is lower power and spread into about 50 times the width of the DV signal. For initial testing, I'd definitely recommend

Thanks! I think I need to get closer to the repeater...thats the settings I had. -- Joe KC2ZKI

We have received confirmation of new regulation rules for ham in France. All digital modes and experimentations are now possible ! D-STAR, P25, Mototrbo, IDAS, TEtra ... Wifi, 4G, WImax, etc

You should set your Router or Computer, with manual settings GATEWAY IP server 10.0.0.1 Primary DNS should also be 10.0.0.1 The Sub should be 255.0.0.0 You could set the secondary DNS to any

D-STAR 23cm Ops - Thanks for participating in the D-STAR 23cm group. If you're using or experimenting with D-STAR on 23m currently let the group know how you're using D-STAR by sending a message

Jim, By any chance do you know if the NJ2DG repeater's DD gateway address is 10.0.0.1? -- Joe KC2ZKI