开云体育

I'm in the market for a 2m/70cm/23cm base station antenna for use with an ID-1 and a 2m/440 mobile transceiver that I haven't picked out yet. The Yaesu FTM-350 looks good though. For an antennas, I

Thanks, James. I must have read the Links page too quickly, since I missed this info at first. Matt KJ6AKF

D-STAR 23cm Ops - Thanks for participating in the D-STAR 23cm group. If you're using or experimenting with D-STAR on 23m currently let the group know how you're using D-STAR by sending a message to

D-Star: Icom ID-1 64-bit Windows drivers -------------------------------------------------------------------------------- To install a working FTDI serial driver for the Icom ID-1 on 64-bit Windows:

Rob, When you go to: http://www.dstardb.net/ID-1.php You get these instructions: To install a working FTDI serial driver for the Icom ID-1 on 64-bit Windows: If you have already attempted an install

I tried this link but it is not accessible. Error code. Rob VE3UIX

Matt, Did you try this link? -> http://www.dstardb.net/ID-1.php It is listed under Links of this group. James, N0XIA

I picked up an ID-1 yesterday, and see that there aren't Windows 7 drivers on the CD it came with. Can anyone point me to newer drivers? I'm on a 64 bit system. I searched this list's resources, but

Hi Dave, I bought two ID-1's to play with. Since the ID1's are merely a network bridge, I tried to connect them to each other without going through a DSTAR network and it worked. I found that I was

Erik I suspect I need to chat with you offline. Sounds like you've implemented something I've been thinking about and that means I shouldn't have to reinvent the wheel! This is cool. 73 gerry n5jxs

Data Repeaters actually modules) are going to give you access to the Internet as part of the standard Icom repeater stack. Implementing the Data modules in a private network is a lot of work with

Arnold, The question was specifically about using the DD mode, so I answered it that way. Since the question was about using DD mode, that's why I suggested connecting the computers together directly

The Icom modules for DD are not repeaters. The ID-1 presents an Ethernet interface to plug into. What it does is put any Ethernet traffic it sees on its Ethernet port to RF encapsulated in a D-STAR

We use Linux appliances behind our RP-1D modules to provide one to many and any to any support for ID-1s. The (simplex) "repeater" modules are happy to accept sessions from any number of ID-1s to the

Can someone please direct me to any information that assists in the linking of ID-1's and Data Repeaters together, for example how do I link "say" 3 ID-1's to two Data repeaters and get them all

The ID-1 does do slow speed data, so your suggestion of testing in DD mode is not necessary. And they said that they were able to get it to work So they're done as far as I'm aware. I don't even think

Before you try anything with the ID-1 (assuming that you are trying in DD mode) hook the two computers to each other with a hub and make them work. His will probably save hours or days of misguidance.

I just wanted to let everyone know that I was able to finally able to do a D-Rats RF connection with Carlos, W7Ql using our Icom ID-1 radios. We were able to work together and get it to work. I only

Interesting use of D-STAR for ARES Exercise! ? ? ----- Forwarded Message ----- To: ga_dstar@... Sent: Thursday, October 4, 2012 3:18 PM Subject: [ga_dstar] Major ARES exercise on

D-STAR 23cm Ops - Thanks for participating in the D-STAR 23cm group. If you're using or experimenting with D-STAR on 23m currently let the group know how you're using D-STAR by sending a message to