Re: D-Rats setup with ID-1
|
Before? you try anything with the ID-1 (assuming that you are trying in DD mode) hook the two computers to each other with a hub and make them work. His will
probably save hours or days of misguidance. If the two computers can talk to each other through a simple switch, then replacing the switch with the ID-1s should be transparent.
?
Make sure that you aren¡¯t using a switch that provides DHCP.
?
Ed WA4YIH
?
toggle quoted message
Show quoted text
From: D-STAR_23cm@... [mailto:D-STAR_23cm@...]
On Behalf Of loadbox8thrun
Sent: Friday, October 12, 2012 1:03 AM
To: D-STAR_23cm@...
Subject: [D-STAR_23cm] Re: D-Rats setup with ID-1
?
?
I just wanted to let everyone know that I was able to finally able to do a D-Rats RF connection with Carlos, W7Ql using our Icom ID-1 radios. We were able to work together and get it to work. I only wish I could say what the
final fix was, other that doing it over and over again and rebooting over and over again. Now our big quest is to be able to do DD networking to drag and drop files from one computer to the other. Thanks to Arnold and everyone else for your contributions.
--- In D-STAR_23cm@..., "Arnold Harding"
>
> You set the radio for DV mode. You are not using the high speed data
> capabilities for D-Rats.
>
> Yes, the computer interface software needs to be off.. RC-24? The only
> interface I've used is the USB cable using Com port 6.
>
> Your normal registration is fine.
>
> Ask more if you have more questions or cannot get it to work.
> Arnold
> KQ6DI
>
> ----- Original Message -----
> From: "loadbox8thrun"
> To: <D-STAR_23cm@...>
> Sent: Wednesday, August 15, 2012 12:33 PM
> Subject: [D-STAR_23cm] D-Rats setup with ID-1
>
>
> > Greetings everyone
> > I recently got an IC ID-1 radio and would like to setup D-Rats to run
> > with it.
> > I have read several resources on how to set the radio up and configure
> > D-Rats. I do have some questions for settings that never seem to get
> > mentioned.
> >
> > 1. Do I set the radio mode to DV or DD?
> > 2. Do I need to shut the laptop radio interface software down and
> > use the RC24 while running D-Rats? I assume that is what
> > is meant in the
> > D-Rats instructions when it states "Cannot use PC application"
> > 3. Do I need to register my ID-1 radio on the gateway or is
> > the original registration enough?
> >
> > Thanks
> > Ron
> > KC7WVS
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
|
