开云体育

Hi Bill, I did some work with Splat for linux a while ago generating a coverage chart here locally. less than 1.58uV was the figure I found, so I rounded up to -100dBm. Have a look at my post from the

Is there a standard 'microvolt' signal value for 1.2 GHz DD links that would give reasonable simulations using Radio Mobile Online? For wifi Mesh planning, using this chart :

1.2 GHz DD has significantly less coverage than the 1.2 GHz DV mode. The signal is lower power and spread into about 50 times the width of the DV signal. For initial testing, I'd definitely recommend

Thanks! I think I need to get closer to the repeater...thats the settings I had. -- Joe KC2ZKI

We have received confirmation of new regulation rules for ham in France. All digital modes and experimentations are now possible ! D-STAR, P25, Mototrbo, IDAS, TEtra ... Wifi, 4G, WImax, etc ... This

You should set your Router or Computer, with manual settings GATEWAY IP server 10.0.0.1 Primary DNS should also be 10.0.0.1 The Sub should be 255.0.0.0 You could set the secondary DNS to any Public

D-STAR 23cm Ops - Thanks for participating in the D-STAR 23cm group. If you're using or experimenting with D-STAR on 23m currently let the group know how you're using D-STAR by sending a message to

Jim, By any chance do you know if the NJ2DG repeater's DD gateway address is 10.0.0.1? -- Joe KC2ZKI

Jim, Quick question....is the gateway address 10.0.0.1 for NJ2DG? -- Joe KC2ZKI

Can you be more specific as to which driver is giving you the error? Also when you installed the drivers had you plugged in the ID-1 to the USB port first? I have the ID-1 running on win7 32 bit in my

Buddy, I hope someone responds with help. I haven't been able to bring up my ID-1 with either of my Windows 7 computers. Both have been upgraded from XP, and now I can't find suitable drivers for

A few years ago, I bought a 32 bit netbook, running Windows 7. I successfully installed the ID-1 software on it. There was some extra step that I had to take, to get the software to run. I cannot

D-STAR 23cm Ops - Thanks for participating in the D-STAR 23cm group. If you're using or experimenting with D-STAR on 23m currently let the group know how you're using D-STAR by sending a message to

Thanks John, Doh!, I never thought of doing it that way. Anyway, a question, in you guys (the list) experience, what additional loss does tree cover give. Any rules of thumb. The reason I ask is that

John, Interesting approach -- looked good on Google Earth For those not familiar, on Google Earth's menu, it's Add --> "Network Link" --> http://ireland.aprs2.net/splat/ei7ig_dstar_-90.kml

Hi Folks, I finally got a chance to get back to this. So given my Antenna Gain/Coax Loss figures, I went for 40 Watts ERP and picked -100 dBm as my threshold (1.58uV + 3dB). Obviously local factors

Moderator's Note: The Icom ID-RP2V is the 1.2 GHZ D-STAR Digital Voice Repeater What brand & model might the 23cm repeater be & what is the price..?? Jim KE4NZG. ________________________________ To:

Hello, I'm ON4AIM sysop of ON0OS D-STAR and ON0OST fone repeater at Ostend. Due to the low activity on 23cm digitale voice, I have a ID-RP2V (23cm voice repeater) for sale. Asking ......EURO If you

I've done all three: * Used the software to set it. * Selected the message and enabled it. * Banged my head on the desk. But I do see that it works for you: