DSTAR InfoCon at Hamvention
Limited seats are still available for D-STAR InfoCon at Dayton Hamvention for 2024
The class?provides
an introduction to D-STAR for new users and more advanced topics for more experienced D-STAR users. The class will be held at the Drury Inn Ballroom at 6616 Miller Lane in the heart of hotel row in Dayton. The 3-hour class will be held on Friday, May 17th
beginning at 8:00am local time. This year’s topics will include getting on-the-air with D-STAR, how to connect around the world, programming for all models of D-STAR radios and hotspots, using DR Mode, easy updating your radio memories and using hotspots and
other D-STAR devices.
?
-
Basics of digital radio and D-STAR
-
Getting started with your D-STAR radio
-
The D-STAR user registration process explained
-
Programming your D-STAR radios and Hotspots
-
Linking to repeaters and reflectors
-
Helpful hints and tips to get the most from D-STAR
-
Sending pictures, D-STAR Data (D-RATS) and DD Mode
Registration and $25 payment are required for the class at?. An Icom ID-52A handheld D-STAR radio will be given away to one lucky student during the class.
?
Also plan to attend the D-STAR Friday Night event at the same location on Friday, May 17th beginning at 6:30. Admission is free, enjoy
light snacks, speakers, demos and an Icom ID-52A handheld radio to be given away.
?
|
Re: RP4010V with ID-RP3 - No ID
On Wed, Nov 22, 2023 at 07:09 PM, Brad Rehm wrote:
I've never tried this, but there is an ID Output setting that applies "While Repeater is Stand-by" in the Analog Repeater section.? Maybe that would do the self-triggered ID that you're looking for.? But I don't see anything that tells me you could stop the IDing by transmitting in either mode.? You'll have to play with the settings to see what they actually do.
?
Our new 440 Gen 3 module in FM would pump out a CWID every 10 minutes rain or shine.? KD8GBL managed to get the "tunnel the USB packets over IP" thing going on our controller and fixed it remotely.?? I just had a thought.? We drive to a full stack existing repeater site, and swap out a Gen 2 440 module for a Gen 3 440, can we then also take out the existing RP-2C, and then have the bits left over for a whole new 440 DV only repeater??? We have tower sites all over, and local clubs are like "we like Fusion" or whatever- we could put in one of the new spare D-Star repeaters as no cost.? ?Maybe that was Ray's "secret plan" - the information technology textbooks say in "platforms" there is value in an increased number of connected nodes.? ??
|
Re: IDRP1200VD availability
On Mon, Apr 15, 2024 at 07:42 PM, Brad Rehm wrote:
Our RP2C died, so all of the repeaters are out of service, and ICOM can no longer repair the RP2C.
You should be able to use any of the new Gen 3 repeater modules as your new controller to get the Gen 2 stack up again and sell off any spare Gen 2 modules.??
|
Re: IDRP1200VD availability
Hi So the repeaters: ? Gen 1 – Was a white pole mount controller + 1.2 DD mode unit, and 1.2 DV add on module ?- 8 pin round interconnect cable Gen 2 – Rack mount RP-2D controller, range of add on modules (2M, 440, 1.2 DV, 1.2 DD) ?– the add on modules work with the Gen 1 controller.? ?RJ45 interconnect. Gen 3- 440, 2M, 1.2 DV voice + controller modules, can work as RF add ons with the Gen 2 controller ? ? ? ? ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Michael KD5DFB
Sent: Tuesday, April 16, 2024 8:18 AM
To: [email protected]
Subject: Re: [D-STAR23cm] IDRP1200VD availability? Erik, Thanks for the insight! I guess I am confused.? Looking at Icom's website and HRO, it appears the current models are the Gen 3 ID-RP2010V, ID-RP4010V and IDRP1200DV. HRO has the ID-RP2010V in stock.? Can someone point me to the evolution of the DSTAR repeaters?? Any 1.2 repeaters that you have that I could deploy in Houston,? I would interested. ? ? We have a vast fleet of D-Star repeaters in MN.? We are upgrading most voice modules to the new dual mode (+FM) hardware.? Thanks Ray ? ?Let me ask if we have spare/take out controllers.? ?I just sold my spare controller which was collecting dust. ? We are in the EMCOM world up here and every monthly FEMA call preaches interoperability (and “Whole Community” LOL) ?above all else.? Which Internet/Digital/Motorola/hotspot mode of the week is geekiest not so much.? ?? ? 1.2 DV was a Japan/California full repeater bands thing and has not taken off generally.? Radios are pricey.? We have a couple of 1.2 DV machines up- crickets.? ? Erik, NY9D ? ? ? ? ? Michael, I believe all of the repeaters in that generation are EOL.? Our RP2C died, so all of the repeaters are out of service, and ICOM can no longer repair the RP2C. Let me know if you're interested in one of the repeaters.? We still have the RP2V and RP2D. Salado, Texas? (50 miles north of Austin) ? On Mon, Apr 15, 2024 at 6:05?PM Michael KD5DFB via <mhebert1975=[email protected]> wrote: Good evening,?
Has anyone heard if the?IDRP1200VD?is EOL?
Got an email back from Icom stating:
"I don’t believe we sell this item anymore, and there is currently no information on whether it will be available again"?
73,
Michael KD5DFB?
|
Re: icom id-1 usb software problem
I just had to load these in a hurry on Windows 10 /64 bit.? The newer Icom drivers work fine.? I copied them off the CD download to an easy place C:/id1.? You have to go into the old control panel hardware screens.? The default pop up windows would not allow this, it says it finds the hardware but will not allow you to over ride the location process which comes up blank.? ?It will eventually (remember Windows 95?) let you manually find the drivers.? You have to do this twice- once for the device once for the serial port.? ??
|
Re: IDRP1200VD availability
This is AI4UE , I like to get it and put it on air in Burlington to cover more range?
I have one more Gen 1 1200DV module you can have.? $50 is the shipping cost.? ?Best to have it on the air vs in my basement.??
|
Re: IDRP1200VD availability
I have one more Gen 1 1200DV module you can have.? $50 is the shipping cost.? ?Best to have it on the air vs in my basement.??
|
Re: IDRP1200VD availability
Erik,
Thanks for the insight! I guess I am confused.? Looking at Icom's website and HRO, it appears the current models are the Gen 3 ID-RP2010V, ID-RP4010V and IDRP1200DV. HRO has the ID-RP2010V in stock.?
Can someone point me to the evolution of the DSTAR repeaters??
Any 1.2 repeaters that you have that I could deploy in Houston,? I would interested.
73,
Michael KD5DFB?
? We have a vast fleet of D-Star repeaters in MN.? We are upgrading most voice modules to the new dual mode (+FM) hardware.? Thanks Ray ? ?Let me ask if we have spare/take out controllers.? ?I just sold my spare controller which was collecting dust. ? We are in the EMCOM world up here and every monthly FEMA call preaches interoperability (and “Whole Community” LOL) ?above all else.? Which Internet/Digital/Motorola/hotspot mode of the week is geekiest not so much.? ?? ? 1.2 DV was a Japan/California full repeater bands thing and has not taken off generally.? Radios are pricey.? We have a couple of 1.2 DV machines up- crickets.? ? Erik, NY9D ? ? ? ? ? Michael, I believe all of the repeaters in that generation are EOL.? Our RP2C died, so all of the repeaters are out of service, and ICOM can no longer repair the RP2C. Let me know if you're interested in one of the repeaters.? We still have the RP2V and RP2D. Salado, Texas? (50 miles north of Austin) ? On Mon, Apr 15, 2024 at 6:05?PM Michael KD5DFB via <mhebert1975=[email protected]> wrote: Good evening,?
Has anyone heard if the?IDRP1200VD?is EOL?
Got an email back from Icom stating:
"I don’t believe we sell this item anymore, and there is currently no information on whether it will be available again"?
73,
Michael KD5DFB?
|
Re: IDRP1200VD availability
? We have a vast fleet of D-Star repeaters in MN.? We are upgrading most voice modules to the new dual mode (+FM) hardware.? Thanks Ray ? ?Let me ask if we have spare/take out controllers.? ?I just sold my spare controller which was collecting dust. ? We are in the EMCOM world up here and every monthly FEMA call preaches interoperability (and “Whole Community” LOL) ?above all else.? Which Internet/Digital/Motorola/hotspot mode of the week is geekiest not so much.? ?? ? 1.2 DV was a Japan/California full repeater bands thing and has not taken off generally.? Radios are pricey.? We have a couple of 1.2 DV machines up- crickets.? ? Erik, NY9D ? ? ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Brad Rehm
Sent: Monday, April 15, 2024 7:42 PM
To: [email protected]
Subject: Re: [D-STAR23cm] IDRP1200VD availability? Michael, I believe all of the repeaters in that generation are EOL.? Our RP2C died, so all of the repeaters are out of service, and ICOM can no longer repair the RP2C. Let me know if you're interested in one of the repeaters.? We still have the RP2V and RP2D. Salado, Texas? (50 miles north of Austin) ? On Mon, Apr 15, 2024 at 6:05?PM Michael KD5DFB via <mhebert1975=[email protected]> wrote: Good evening,?
Has anyone heard if the?IDRP1200VD?is EOL?
Got an email back from Icom stating:
"I don’t believe we sell this item anymore, and there is currently no information on whether it will be available again"?
73,
Michael KD5DFB?
|
Re: IDRP1200VD availability
Michael,
I believe all of the repeaters in that generation are EOL.? Our RP2C died, so all of the repeaters are out of service, and ICOM can no longer repair the RP2C.
Let me know if you're interested in one of the repeaters.? We still have the RP2V and RP2D.
Brad, KV5V Salado, Texas? (50 miles north of Austin)
On Mon, Apr 15, 2024 at 6:05?PM Michael KD5DFB via <mhebert1975= [email protected]> wrote: Good evening,?
Has anyone heard if the?IDRP1200VD?is EOL?
Got an email back from Icom stating:
"I don’t believe we sell this item anymore, and there is currently no information on whether it will be available again"?
73,
Michael KD5DFB?
|
Good evening,?
Has anyone heard if the?IDRP1200VD?is EOL?
Got an email back from Icom stating:
"I don’t believe we sell this item anymore, and there is currently no information on whether it will be available again"?
73,
Michael KD5DFB?
|
DSTAR Training at Hamvention 2024
D-STAR InfoCon is back at Dayton Hamvention for 2024?providing an introduction to D-STAR for new users and more advanced topics for more experienced D-STAR users. The class will be held at the Drury Inn Ballroom at 6616 Miller Lane in the heart of hotel row in Dayton. The 3-hour class will be held on Friday, May 17th beginning at 8:00am local time. This year’s topics will include getting on-the-air with D-STAR, how to connect around the world, programming for all models of D-STAR radios, using DR Mode, easy updating your radio memories and using hotspots and other D-STAR devices.
?
·???????? Basics of digital radio and D-STAR
- Getting started with your D-STAR radio
- The D-STAR user registration process explained
- Programming your D-STAR radios
- Linking to repeaters and reflectors
- Helpful hints and tips to get the most from D-STAR
- D-STAR Data (D-RATS) and DD Mode
The class is $25 and advance registration and payment is required. Complete registration and payment at . An Icom ID-52A handheld D-STAR radio will be given away to one lucky student during the class.
|
Re: ID-RP1VS available at shipping cost
I would love to have that module if it’s available. Already have a duplexer.? Radio Rex AJ4GC
toggle quoted message
Show quoted text
On Apr 13, 2024, at 10:40?AM, NY9D <ny9d@...> wrote:
?We have at least one ID-RP1VS 1.2Gig? Gen1 voice repeater module available at shipping cost. ($50?)? ?These are in Minneapolis.??
Erik, NY9D?
|
Re: icom id-1 usb software problem
The ID-1 drivers + software can be made to work on Windows 7 and 10, 32 and 64 bits.? ? You need the newer (possibly signed) serial /USB chipset drivers.? ?Extensive searching is required.? The drivers are the worst- there is a complex procedure.? ?The application functions in compatibility mode.??
|
ID-RP1VS available at shipping cost
We have at least one ID-RP1VS 1.2Gig? Gen1 voice repeater module available at shipping cost. ($50?)? ?These are in Minneapolis.??
Erik, NY9D?
|
We bought a commercial 1.2 voice duplexer (TX/RX?) as I recall in 2008 for like $900.? Alan WB0ZKB made 1.2 duplexers and triplexers out of welded 4” aluminum square tubing pieces.? ?He made several six element kits for sharing the same GP-98 antenna for voice and DD data.? ? ? ? 
?
|
My experimenting is showing that it's not going to be too difficult to make a combination of notch and bandpass cavities from the 70cm?Sinclair Q3220E. Not going to try to make the combined notch/pass cavities, that gets too much into "magic". If necessary I can go with 2 antennas with the duplexer if I need additional isolation. Luckily I have a Tek 794P analyzer with companion tracking generator. First tried a NanoVNA-F but since it's working on harmonics at 23cm, it kept tuning on the 70cm resonances.
August KG7BZ
|
Sounds good.? I picked up the repeater from my storage earlier today.? I'll cobble some antennas together this weekend.? I'll let you know.
|
I work at I-10 and Campbell. I will plan to bring my 9700 one day and see if I can work your repeater, if it is on the air. Also, W5ZM replied to my post and said there is a repeater on 1292. The only repeater I have heard of was in the galleria and it was supposedly decommissioned sometime year.?
My info is good on qrz.
73,
Michael KD5DFB?
I have a 23cm Icom repeater I bought during the HRO "flash sale" last year.? I was going to put in on the air this week.? Not much height, so a "backyard" setup near Silber and I-10.? I'm also a 9700 owner with nothing in the log on 23cm.? Do you know of any existing 23cm repeaters in Houston area?
|
I have a 23cm Icom repeater I bought during the HRO "flash sale" last year.? I was going to put in on the air this week.? Not much height, so a "backyard" setup near Silber and I-10.? I'm also a 9700 owner with nothing in the log on 23cm.? Do you know of any existing 23cm repeaters in Houston area?
|
NY9D
Peter Scherp
Preston Moore, N5YIZ