¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: ID1 to ID1 Digital Data


 

¿ªÔÆÌåÓý

On 28/12/12 20:48, Woodrick, Ed wrote:

Most all of the protocols should work. You just have to remember that it is 128 kbps half-duplex circuit. So that means that video at 400 kbps ain¡¯t going to hack it and full duplex audio at 64 kbps per channel isn¡¯t going to make it.

The ID-1s implement the Ethernet protocol, which means that NetBIOS, Banyan Vines, Novell, and other protocols will also run.

?

You¡¯re going to get speeds a little better than 28.8kbps modems, but not much. The secret it to not attempt to overload the circuit, keep the throughput reasonable for a 128 kbps connection and life should be great.

?

From: D-STAR_23cm@... [mailto:D-STAR_23cm@...] On Behalf Of viaopensource
Sent: Friday, December 28, 2012 8:57 AM
To: D-STAR_23cm@...
Subject: [D-STAR_23cm] Re: ID1 to ID1 Digital Data

?

?

--- In D-STAR_23cm@..., John Ronan wrote:
> Hi There,
>
> I think you'll find, in a lossy network TCP sucks badly, UDP will work
> well though.
>
> Regards
> John
> EI7IG

The protocols that did work were slow, but worked well. So in an emergency situation, it would be better than nothing.

--
Joe
kc2zki


Join [email protected] to automatically receive all group messages.