Also should have N connectors on the Bird.
Dummy load should also be rated for 1.2 g.
Every little thing matters at that frequency.
Some coax will not even work. Adapters are a no, no. Pl-259 are iffy, non teflon ones probably wont work.
Dale
----- Original Message -----
From: n7qor@...
To: "D-STAR 23cm"
Sent: Sunday, November 14, 2010 3:25:40 PM
Subject: Re: [D-STAR_23cm] ID-1 power adjustments
?
Another matter to consider, in fact one of the most important, is the cable(s) used to connect raio to bird to load.
?
I have seen apparent loss of power due to cables / connectors.
?
----- Original Message -----
From: "Arnold Harding"
To: "D-STAR 23cm"
Sent: Sunday, November 14, 2010 10:43:48 AM
Subject: Re: [D-STAR_23cm] ID-1 power adjustments
Just curious... ?What sort of load are you going into? ?What type of
connectors on the Bird and load? ?Are you measuring any reflected
power from the load?
Arnold
KQ6DI
----- Original Message -----
From: "kj4g"
To:
Sent: Sunday, November 14, 2010 9:43 AM
Subject: [D-STAR_23cm] ID-1 power adjustments
>I have four ID-1 radios and since I have purchased a Bird 10K 10watt,
>1.1 to 1.6 Ghz slug, I have found the high power output to range from
>3 to 6 watts on each radio.(not even advertised power).
> I have heard that there are directions available on how to adjust
> the power output and also that the radios are capable of power up to
> 20 watts.
> Any information about this would be appreciated. I have tried to
> research passed posting and couldn't find anything on this issue.
> 73,
> Paul, KJ4G
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
?? ?http://groups.yahoo.com/group/D-STAR_23cm/
<*> Your email settings:
?? ?Individual Email | Traditional
<*> To change settings online go to:
?? ?http://groups.yahoo.com/group/D-STAR_23cm/join
?? ?(Yahoo! ID required)
<*> To change settings via email:
?? ?D-STAR_23cm-digest@...
?? ?D-STAR_23cm-fullfeatured@...
<*> To unsubscribe from this group, send an email to:
?? ?D-STAR_23cm-unsubscribe@...
<*> Your use of Yahoo! Groups is subject to:
?? ?http://docs.yahoo.com/info/terms/
