开云体育

The following message below was received from the New Zealand and Australian Icom service departments.
I have also asked Icom New Zealand to contact the technical division at Icom Japan who are providing
us with ID-RP2C firmware updating. We are updating from V1.0 and V1.2 in the two RP2C controllers
we have, to V1.6. Only Icom service agents can do this due to restrictions placed on Icom by JARL.
Icom Japan (as above, RP2C firmware department) say they no longer have the ID-1 Adjustment Software
and not even a CD version. So we hope someone out there might have it on a shelf.
Icom Europe perhaps? Icom UK lost all their files in a server crash some years ago so I'm thinking
almost all possibilities have been exhausted to find this rare Adjustment Software.
Did Icom ever create it? Section 5 of the ID-1 Service manual clearly indicates that the software
was available in 2009 or later.

Here is the feedback message from Icom New Zealand and Australia:?

We do not have a copy of the adjustment software and when we enquired about it a little while back with HQ
we were informed that they no longer had a copy on file.
I had previously searched around the globe for it but to no avail.

Lets keep looking. 73 and good DV. John ZL2TWS