开云体育

Rae's Stationery Creation _ Brenda's AL _ Tutorial _ Warm Moon ?Tinkertuts

MY AI CREATION Tut By Font Randy

Hello Again, Another fun one to do. Hugs, Sharon Stat By Sharecuzicare Font Used: SpringTime Tut By Elaine Mask All Over SB HERE & HERE My Groups: Sharecuzicare Creations SLS Stat Corner Classic Stats(OE Classic) PSPTubesNMore2 Seasons&HolidayFun

Hello All, Here's my try at Tut #2 This is fun and wasy to do. Hugs, Sharon Stat By Sharecuzicare Font Used: Spring Font Tut By Elaine Feedback SB HERE & HERE My Groups: Sharecuzicare Creations SLS Stat Corner Classic Stats(OE Classic) PSPTubesNMore2 Seasons&HolidayFun

MY AI CREATION Tut By Font Ventura Regular

Behind The Curtains SB Tut Tube artist unknown Written by Elaine (?Elaine's Artistry) October 2022 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Written for PSP 9 Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Taller than wide works best for this tutorial. Accents/elements (optional) Performance Notes: All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube/mist of your choice in PSP 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 385 pixels or less *Note we will be able to resize later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool * Note-Select 2 shades of the same color Left click and select a med. light color for the Foreground color. Right click and select a deep dark color for the Background color. 6. Edit > Copy Minimize your tube. 7. File > New Image Settings: Width = 400 pixels Height = 400 pixels Raster Background = Checked Transparent = Checked 8. Selection Tool > Custom selection Settings: Top = 0 Left = 0 Right = 30 Bottom = 400 9. Flood Fill Tool Settings: Match Mode = None Sample Merged = Unchecked Blend mode = Normal Opacity = 100 Right click to fill with Background (dark) color. 10. Effects > Texture Effects > Blinds Settings: Width = 4 Opacity = 50 Color = Foreground (light) color Horizontal = Unchecked Light from left/top = Checked 11. Selections > Select None 12. Effects > 3D Effects > Inner Bevel Settings: Bevel = 2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 13. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 5 Opacity = 33 Blur = 5.00 Color = Black Shadow on new layer = Unchecked 14. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 15. Layers > Duplicate 16. Effects > Distortion Effects > Polar Coordinates Settings: Rectangular to polar = Checked Transparent = Checked 17. Layers > Duplicate 18. Image > Flip 19. Highlight copy of Raster 1 (middle layer) 20. Effects > Image Effects > Offset Settings: Horizontal offset = -30 (minus) Vertical offset = -7 (minus) Custom = Checked Transparent = Checked 21. Highlight your Top layer (Copy 2 of Raster 1) 22. Effects > Image Effects > Offset Settings: Vertical offset = 7 23. Layers > Merge> Merge Down 24. Effects > Image Effects > Offset Settings: Horizontal offset = -70 (minus) Vertical offset = 0 Transparent = Checked 25. Layer > Merge > Merge Down 26. Layers > Duplicate 27. Image > Mirror 28. Edit > Paste > Paste As New Layer (your tube/mist) **Note: Skip steps 27 and 28 if using a misted tube 29. Effects > 3D Effects > Inner Bevel 30. Effects > 3D Effects > Drop Shadow 31. Layers > New Raster Layer 32. Layers > Arrange > Send to Bottom 33. Flood Fill Tool Left click to fill with your Foreground (light) color 34. Adjust > Add/Remove Noise > Add Noise Settings: Gaussian = Checked Noise = 12 Monochrome = Checked 35. Effects > Edge Effects > Dilate 36. Layers > Merge > Merge Visible ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 37. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Lock aspect ratio = Unchecked Placement = Middle Left Arrow 38. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 8 Opacity = 60 Blur = 14 Color = Black Shadow on new layer = Checked 39. Effects > Image Effects > Seamless Tiling 40. Layers > New Raster Layer 41. Layers > Arrange > Send to Bottom 42. Flood Fill Tool Left click to fill with your Foreground (light) color 43. Adjust > Add/Remove Noise > Add Noise 44. Effects > Edge Effects > Dilate 45. Layers > New Raster Layer 46. Layers > Arrang

IMF is attached My letters here - AI Art by Shannon The Sponge SB Tut by Elaine's Artistry Here & Here - My Fotki

Chain Link Fence SB Tut Tube artist unknown Template ? Elaine's Artistry Written by Elaine (?Elaine's Artistry) September 2022 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Tip: If using my templates for tags you may resize and add borders if you like. I do require a credit on your tag for the template. DO NOT COVER UP OR ERASE MY WATER MARK Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Template - Chain link fence templatea.pspimage (Available Here and Here) Texture - Corel_15_036 Preparation: Save the Texture in your PSP Texture Folder Open the Chain link fence templatea.pspimage in PSP. Minimize for now. Performance Notes: For users of PSP X and higher: If your Manual Color Correction icon is not visible on your toolbar you may wish to do the following to place the icon on your toolbar for future use: View > Customize In left pane scroll down and left click on All Commands. In the right-hand pane scroll until you find Manual Color Correction. Click and drag it to where you want it on your toolbar. All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube/mist of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors, it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also, with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 7. Activate the Chain link fence templatea.pspimage 8. Window > Duplicate (Shift + D) Close original. 9. Layers Palette Highlight (Activate) Raster 2 10. Layers > Delete 11. Manual Color Correction Settings: Preset target color = Unchecked Manual target color = Checked Freehand selection = Unchecked Source = #c0c0c0 Target = Your Foreground (light) color *Note: In PSP version 9 and lower it will be Adjust > Color Balance > Manual Color Correction 12. Edit > Paste > Paste As New Layer (Your Tube) 13. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 14. Layers > Merge > Merge Visible 15. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 21. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 6 Opacity = 44 Blur = 10.00 Color = Black Shadow on new layer = Checked 22. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 23. Layers > Merge > Merge Visible 24. Layers > New Raster Layer 25. Layers > Arrange > Send to Bottom 26. Flood Fill Tool Settings: Match Mode = None Tolerance = 0 Blend Mode = Normal Opacity = 100 Left click to fill with your Foreground (light) color 27. Effects > Texture Effects > Texture Settings: Texture = Corel_15_036 Size = 25 Smoothness = 0 Depth = 2 Ambience

DOT DOT PLAID By ? PSPDesignzByMichelle March 2, 2010 Important Information: -This tutorial was written by me "Michelle Hofelich" aka "PSPDesignzByMichelle" for my Incredimail sharing group "Friends Creating" and my web site "PSPDesignzByMichelle". Any resemblance to another tutorial is purely coincidental and unintentional. The ideas of this tutorial come strictly from me just playing around in PSP. Please do not copy or claim this tutorial as your own. - All tubes and/or graphics used are strictly for non-profit use. I either got them from free-sharing groups or paid for them. No copyright infringement intended. - Do NOT share my tutorial without my permission - You may join my yahoo group and go special notices for the supplies and new tutorials - You must have some knowledge of using PSP... This is NOT for beginners - All settings are set to DEFAULT unless noted -You must link my tutorials back to my group at http://tech.groups.yahoo.com/group/FriendsCreating/ (you might also put the name of the tut on there so members know what to look for) Supplies Needed: -PSP (I use PSPX2) Trial version here -Letter Creator (to put it together) buy it here -Plugins - NameSuppressed - PlaidLite -Mask - None -PresetShape - None -Tube of choice -Accents of choice -Styled line - Solid -Texture - None *Install all supplies in the appropriate place in PSP before you begin* Preparations: -Open tube/Duplicate (shift + D) and close original -Resize your tube 300W or less x 375H or less - Adjust/Sharpen (if needed) -Edit/Copy tube- Yes -Pick out two colors from tube Foreground - Dark Background - Light *All settings remain the same unless noted changes are made* *View/Rulers - Checked I never uncheck my rulers...they are always on...you might need to have yours on when doing any of my tutorials. *OPTIONAL* Nothing optional this time Let's begin creating: 1. File/New Image Raster Background - Checked Transparent - Checked Size - 75W X 400H 2. Flood Fill Tool Fill with dark color 3. Selections/Select all 4. Edit/Paste Into Selection 5. Selections/Select None 6. Effects/Image Effects/Seamless Tiling Default settings 7. Effects/Plugins/Name Suppressed/PlaidLite Hit the randomize button/or mess around with the settings till you find a pattern you like 8. Rectangle Tool Width - 1 Line Style - Solid Draw a rectangle in the center (leave enough space on both sides to see the plaid pattern and take the ends off of the top and bottom ) See image below 9a. Objects/Align/Center in Canvas 9b. Layers/Convert to Raster Layer 10. Effects/3D Effects/Drop Shadow V-0 H-0 O-65 B-5 Color-Black Shadow on New Layer - Not Checked 10. Image/Add Borders Symmetric-Not Checked T-0 L-2 R-2 B-0 Color - Dark 11. Image/Add Borders L-5 R-5 Color - Light 12. Image/Add Borders L-2 R-2 Color-Dark 13. Layers/Promote Background Layer 14. Image/Canvas Size 150W X 400H Placement - Left Center Arrow 15. Layers/New Raster Layer 16. Layers/Arrange/Send To Bottom (need to make pattern) 17. File/New 100W X 100H 18. Flood Fill Tool Fill with light color 19. Paint Brush Tool Shape - Circle Size - 32 Click in the center several times (about 10) 20. Effects/Image Effects/Seamless Tiling Default settings 21. Change your foreground color to your new pattern A-0 S-50 22. Click back on your working SB canvas 23. Flood Fill Tool Fill with your new pattern 24. Image/Add Borders Symmetric - Not Checked T-0 L-0 R-2 B-0 Color - Dark 25. Image/Add Borders Color - Light 26. Image/Add Borders Color - Dark 27. Image/Add Borders R-5 Color - Light 28. Image/Add Borders R-2 Color - Dark 29. Image/Add Borders Color - Light 30. Image/Add Borders Color - Dark 31. Layers/Promote Background Layer 32. Image/Canvas Size 1800W (or choice) X 400H Placement - Left Center Arrow 33. Layers/New Raster Layer 34. Layers/Arrange/Send To Bottom 35. Click on your foreground palette and change the pattern settings scale to 100 36. Flood Fill Tool Fill with pattern 37. Layers/New Raster Layer 38. Flood Fill Tool Fill with light color 39. Lower opacity to around 90 (text friendly but still seeing dots) 40. Layers/Merge Visi

The Sponge SB Tut Template ? Elaine's Artistry Vintage tube (no ? infringement intended) Written by Elaine (?Elaine's Artistry) May 2022 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Tip: If using my templates for tags you may resize and add borders if you like. I do require a credit on your tag for the template. DO NOT COVER UP OR ERASE MY WATER MARK Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Template - sponge_templatea.pspimage (Available Here and Here) Plugin: Simple - Quick Tile (Availabe Here) Preparation: Install plugin if needed in your plugin folder. Open the sponge_templatea.pspimage in PSP. Minimize for now. Performance Notes: For users of PSP X and higher: If your Manual Color Correction icon is not visible on your toolbar you may wish to do the following to place the icon on your toolbar for future use: View > Customize In left pane scroll down and left click on All Commands. In the right-hand pane scroll until you find Manual Color Correction. Click and drag it to where you want it on your toolbar. All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube/mist of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors, it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also, with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 7. Activate the sponge_templatea.pspimage 8. Window > Duplicate (Shift + D) Close original. 9. Layers Palette Highlight (Activate) Raster 4 10. Layers > Delete 11. Layers Palette Highlight (Activate) Raster 1 12. Manual Color Correction Settings: Preset target color = Unchecked Manual target color = Checked Freehand selection = Unchecked Source = #c0c0c0 Target = Your Background (dark) color *Note: In PSP version 9 and lower it will be Adjust > Color Balance > Manual Color Correction. 13. Layers Palette Highlight (Activate) Raster 2 14. Manual Color Correction Settings: Source = #808080 Target = Your Foreground (light) color 15. Layers Palette Highlight (Activate) Raster 3 16. Manual Color Correction Settings: Source = #c0c0c0 Target = Your Foreground (light) color 17. Effects > Texture Effects > Blinds Settings: Width = 4 Opacity = 34 Color = Your Background (dark) color Horizontal = Unchecked Light from left/top = Checked 18. Edit > Paste > Paste As New Layer (Your Tube) 19. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool *Note: If using a mist skip steps 20 and 21. 20. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 21. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 0 Opacity = 78 Blur = 12.00 Color = Black Shadow on new layer = Unchecked 22. Highlight Raster 1 23. Edit > Co

Feedback SB Tut Tube Artist unknown Written by Elaine (?Elaine's Artistry) April 2022 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate to Advanced Supplies Needed: Tube/mist of your choice Texture - Pattyf56_text_05_g (Available Here and Here) Accents/Elements (optional) Plugin: MuRa's Meister - Copies (Available Here) Preparation: Install plugin, if needed Save Texture to your PSP Texture Folder. Notes: This tutorial assumes you have a working knowledge of PSP. All settings will remain the same unless otherwise stated. Let's have some fun.......:) 1. File > Open Open your tube/mist 2. Windows > Duplicate (Shift+D) 3. Image > Resize Settings: Resample using = Bicubic Lock aspect ratio = Checked Resize all layers = Checked Width = will self - adjust Height = No greater than 385 pixels *Note we can resize this again later if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool: Left click and select a very light color for your Foreground color. Right click and select a dark color for your Background. *Note: Be sure your two colors have contrast. 6. Edit > Copy 7. Minimize your tube 8. File > New Image Settings: Width = 400 Height = 400 Raster Background Transparent 9. Flood Fill Tool Settings: Match Mode = RGB Value Use all layers = Unchecked Tolerance = 0 Blend Mode = Normal Opacity = 100 Right click to fill with Background (dark) color. 10. Layers > New Raster Layer 11. Selection Tool > Custom selection Settings: Top = 0 Left = 20 Right = 40 Bottom = 400 12. Flood Fill Tool Left to fill with your Foreground (light) color 13. Selections > Select None 14. Effects > 3D Effects > Inner Bevel Settings: Bevel = 2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 15. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 0 Opacity = 60 Blur = 4.00 Color = Black Shadow on new layer = Unchecked 16. Effects > Plugins > MuRa's Meister > Copies Settings: 17. Layers > Duplicate 18. Image > Mirror 19. Layers > Merge > Merge Down 20. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 22 Transition = 37 21. Highlight Raster 1 22. Effects > Texture Effects > Texture Settings: Pattyf56_text_05_g Size = 25 Smoothness = 0 Depth = 1 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 50 Elevation = 30 23. Edit > Paste > Paste As New Layer (Your tube) 24. Layers > Arrange > Bring to Top ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool 25. Effects > 3D Effects > Inner Bevel 26. Effects > 3D Effects > Drop Shadow Settings: Opacity = 70 Blur = 12.00 Shadow on new layer = Unchecked 27. Move Tool Move tube to your desired position I put mine in center and down toward bottom. 28. Layers > Merge> Merge Visible 29. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 30. Effects > 3D Effects > Drop Shadow Settings: Horizontal = 6 Opacity = 45 Shadow on new layer = Checked 31. Effects > Image Effects > Seamless Tiling Settings: Width = 50 Transition = 50 32. Layers > New Raster Layer 33. Layers > Arrange > Send to Bottom 34. Flood Fill Tool Right click to fill with Background (dark) color 35. Effects > Texture Effects > Texture 36. Layers > New Raster Layer 37. Flood Fill Tool Left click to fill with Foreground (light) color. 38. Layers Palette Lower Opacity to around 40 or 50. 39. Layers > New Raster Layer 40. Layers > Arrange > Bring to Top 4

Mask All Over SB Tut Vintage Tube artist unknown Mask artist unknown Written by Elaine (?Elaine's Artistry) April 2022 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Mask - 436x433dc (Available Here and Here) Preparation: Save the mask in your PSP Mask Folder All settings will remain the same unless otherwise stated. Okay ...Time to create.........:) 1. File > Open Open tube/mist of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self adjust Height = 350 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors, it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also, with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 1. File > New Image Settings: Width = 400 Height = 400 Raster Background Transparent 2. Flood Fill Tool Settings: Match Mode = RGB Value Use all layers = Unchecked Tolerance = 0 Blend Mode = Normal Opacity = 100 Right click to fill with Background (dark) color. 3. Layers > New Raster Layer 4. Flood Fill Tool Left click to fill with your Foreground (light) color. 5. Layers > Load/Save Mask > Load Mask From Disk Settings: Mask = 436x433dc Source luminance - Checked Fit to layer = Checked Invert transparency = Unchecked Hide all mask = Checked 6. Adjust > Sharpness > Sharpen 7. Layers > Merge > Merge Group 8. Layers > New Raster Layer 9. Selection Tool > Custom selection Settings: Top = 0 Left = 10 Right = 30 Bottom = 400 10. Flood Fill Tool Right click to fill with Background (dark) color 11. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 12. Selections > Select None 13. Effects > 3D Effects > Drop Shadow Settings: Vertical = -4 (minus) Horizontal = 4 Opacity = 30 Blur = 8.00 Color = Black Shadow on new layer = Unchecked 14. Repeat Drop Shadow Settings: Vertical = 4 Horizontal = -4 (minus) 15. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 16. Layers > Duplicate 17. Image > Mirror 18. Edit > Paste > Paste As New Layer (Your Tube) 19. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool 20. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 21. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 0 Opacity = 68 Blur = 8.00 Color = Black Shadow on new layer = Unchecked ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 22. Layers > Merge > Merge Visible 23. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 24. Layers > New Raster Layer 25. Layers > Arrange > Send to Bottom 26.

Fancy Mask SB Tut Mask and tube owner unknown Written by Elaine (?Elaine's Artistry) June 2022 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Mask - wouter112 Texture - Ipp09_pattern50 Preparation: Save mask wouter112 in your PSP Mask folder. Save Texture Ipp09_pattern50 in your PSP Texture folder All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube/mist of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a dark color for the Background color. 6. Edit > Copy Minimize your tube for now. 7. File > New Image Settings: Width = 400 Height = 400 Raster Background Transparent 8. Flood Fill Tool Settings: Match Mode = RGB Value Use all layers = Unchecked Tolerance = 0 Blend Mode = Normal Opacity = 100 Right click to fill with Background (dark) color. 9. Layers > New Raster Layer 10. Flood Fill Tool Settings: Left click to fill with your Foreground (light) color. 11. Layers > Load/Save Mask > Load Mask From Disk Settings: Mask = wouter112 Source luminance - Checked Fit to layer = Checked Invert transparency = Unchecked Hide all mask = Checked 12. Layers > Merge > Merge Group 13. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 **Note - I am using a new tiling method here. 14. Effects > Image Effects > Seamless Tiling Settings: From the dropdown box chose the Stutter Vertical If you don't have it, here are the settings: Corner = Checked Vertical = Checked Vertical Offset = 90 Transition = 100 15. Edit > Paste > Paste As New Layer (Your tube) 16. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool **Note - If using a mist skip next 2 steps. 17. Effects > 3D Effects > Inner Bevel 18. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 0 Opacity = 68 Blur = 8.00 Color = Black Shadow on new layer = Unchecked 19. Layers > Merge > Merge Visible 20. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 21.Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 6 Opacity = 45 Blur = 10 Shadow on new layer = Checked 22. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 23. Layers > New Raster Layer 24. Layers > Arrange > Send to Bottom 25. Flood Fill Tool Right click to fill with your Background (dark) color. 26. Effects > Texture Effects > Texture Settings: Ipp09_pattern50 Size = 30 Smoothness = 6 Depth = 6 Ambience = 0 Shininess = 0 Color = White Angle = 315 Intensity = 50 Elevation = 30 27. Layers > New Raster Layer 28. Flood Fill Tool Left click to fill with your Foreground (light) color 29. Layer Palette Lower opacity so it is text-friendly 30. Layers > New Raster Layer 31. Layers > Arrange > Bring To Top 32. Add your Watermark and credits. 33. File > Export > JPEG Optimizer Settings: Set compression value to 15-20 or to your preferred compressio

FINE LEATHER NOISE By Michelle DesignzByMichelle March 1, 2009 You must have some knowledge of PSP to do this tutorial. I have tried to put all paths needed in here. Be Creative! Also if you do not like my drop shadow settings feel free to use your own. If my chosen color does not work please choose another one. What you will need : -PSP (I used PSPX2) -Letter Creator to put it together -You will need to have these plugins installed before you start -Eye Candy 4000 = HSB Noise -I.C.NET Software - Filters Unlimited 2.0 -Install plugins in your plugins folder in your PSP program -Close PSP and restart it, look and make sure your plugins are there. -Tube of choice -Accents if wanted First let's set up a few things we need: -Open tube/ Duplicate (shift + D) close orginal -Resize your tube 300W or less x 375H less -Edit/ Copy (your tube) -Pick out two colors from tube Foreground = (Dark) Background = (Light) -ALL SETTINGS ARE SET TO DEFAULT UNLESS NOTED CHANGES ARE MADE BY ME (This means that when you go to use a tool reset it to default then make any changes that I have noted, I am not writing all settings down) **All Settings Remain The Same Through Out Tutorial Unless Noted Changes Are Made By Me!** Let's begin creating: 1. File/New/ Open transparent image 125W x 400H 2. Selection tool/ Custom selection Selection type = Rectangle Mode = Add (shift) Feather = 0 Anti-alias = Checked Top = 0 Left = 0 Right = 50 Bottom = 400 3. Flood fill tool/ Flood fill with dark color 4. Effects/ Plugins/ Eye candy 4000/ HSB noise HV = 25 SV = 30 BV = 40 OV = 0 LW = 28.00 LH = 28.00 Pattern = Smooth fractal FR = 50 Seamless tile = Checked Random Seed = 180 5. Selections/ Select none 6. Layers/ Duplicate 7. Image/ Mirror 8. Selection tool/ Custom selection Left = 50 Right = 75 9. Layers/ New raster layer 10. Flood fill tool/ Flood with Light color 11. Effects/ Texture effects/ Fine leather Color = White A = 30 B = 40 T = 255 N = 10 L = 4 12. Effects/ 3D effects/ Drop shadow V = 2 H = 2 O = 55 B = 5.00 Color = Black Shadow on new layer = NOT checked 13. Effects/ 3D effects/ Drop shadow V = -2 H = -2 14. Selections/ Select none 15. Layers/ Merge/ Merge visible 16. Image/ Canvas size 1500W X 400H (or preferred width) Placement = Middle left 17. Effects/ 3D effects/ Drop shadow V = 2 H = 2 18. Effects/ Image effects/ Seamless tiling Edge = Checked Vertical = Checked 19. Layers/ New raster layer 20. Flood fill tool/ Flood with light color 21. Layers/ Arrange/ Send to bottom 22. Effects/ Plugins/ IC.Net Software/ Filters unlimited 2.0 Paper textures = Striped paper, Fine Intensity = 20 Lightness = 50 23. Effects/ Image effects/ Seamless tiling Default 24. Edit/ Paste as new layer (your tube) 25. Layers/ Arrange/ Bring to top 26. Move tool/ Move to the left your preference 27. Effects/ 3D effects/ Drop shadow 28. Layers/ New raster layer 29. Add your text if you would like and any accents 30. Add drop shadow to your text 31. Layers/ New raster layer 32. Add your watermark 33. Layers/ Merge/ Merge all (flatten) 34. File/ Save as JPEG 35. Take to Letter Creator Thank you so much for trying my tutorial! This tutorial is not copied from any other tutorial. Results are my own! Thanks to Newbies Tut Writers Testers! Testers; Carrie, Belinda, Jan, Jerri and Toria I would love to see everyone's results. You can send your results to my email address which is michellehofelich@... Please link back to my group below http://tech.groups.yahoo.com/group/FriendsCreating/ Hugs, Michelle .

We had a jacaranda tree in our back yard when we lived in Mesa, AZ. It was so pretty every spring. The blossoms got thicker every year we were there. Goodies attached for your use, only my tag & blank made. Have a great weekend! Hugs, PaigeLuvsChocolate Cal's Tut HERE Odd Borders Frame Set Stat & Tag Font: JandaSafe&Sound Tag:

This was a fun one to play with. Thanks for looking, goodies attached for your use. Only blank and my tag were made. Smiles & Hugs, PaigeLuvsChocolate group shared art L M Kunes Creations (closed) PatchRing Tut Stat & Tag Font: Ducky Tag:

I forgot to say that Bunny Girl was Tut #5, so sorry. This tut I altered just a little bit. I put the tube on the top before running the plugin/filter. I like the colored heading it made. Thanks for looking, goodies attached for your use. No tag besides mine & the blank. Easter Hugs, -------Original Message------- From: don_n_paige@... Date: 3/28/2025 6:38:55 PM To: Paigem Subject: Bunny Girl NBM This tube was made by LoriM. I forgot to get that in the footer. Thanks for looking, and please feel free to use the goodies attached. Only blank was tagged. Hugs, Paige PaigeLuvsChocolate Lori M AI art L M Kunes Creations (closed) Noisy Stripes TB Tut Stat Font: Bumblemilk Demo Tag Font: Burning Heart Personal Tag:

This tube was made by LoriM. I forgot to get that in the footer. Thanks for looking, and please feel free to use the goodies attached. Only blank was tagged. Hugs, Paige PaigeLuvsChocolate group shared art L M Kunes Creations (closed) Pixelate Wave Tut Stat Font: PC Pencil Tag Font: Bunny Cute Tag:

Thanks for looking, goodies are attached for your use. No tags besides the blank. Feel free to tag your own. Hugs, Paige PaigeLuvsChocolate group shared art L M Kunes Creations (closed) Noisy Checkers Tut Stat & Tag Font: Paul PC Tag:

I'm sharing goodies for your use. I only tagged my tag & blank. Thanks for looking! Big Hugs, PaigeLuvsChocolate Cal's Tut HERE Golden Corners Frame Stat & Tag Font: Otterly Adorable Tag: (70-85-98)