开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. CreatorsOnCrippleCreek
  2. Messages
Expanded Topics Messages
Date
Tut #8

 

开云体育

Brushed With Lines?Tutorial by
?
?
Any resemblance to another tutorial is purely coincidental and unintended. Please do not re-copy, translate?or add this tutorial to any website without my knowledge and permission.
?
Skill level: Beginner. This tutorial assumes you know how to use basic menu tools and functions in Paint Shop Pro. This?tutorial was written using PSP?version #10.
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Plugins:
No outside plugins are required.
?
Materials:
?
Brush Tip Fuzz?Soft?(Check to see if your PSP already has it. If not, it is available in my group's files section - ).

A medium size pixel tube of your choice.
Complimentary smaller accent pixel tube(s).
?
*Note: Although this tutorial is intended for use with small size pixel tubes, you may also use a single tall / thin tube in this tutorial.
?
Step 1: Prepare your pixel tubes for use!
?
* If you are using?pixel tubes that?are alone on a canvas, simply go to the Edit menu, choose Copy and then Paste as a?New?Image.
?
* If you are using a pixel sheet with several tubes on it, you may have to do either of the following:
?
a) Check to see if each tube is already on its own separate layer. If so, simply use your mover tool to click on the pixel tube you wish to use. This will activate the layer of that tube. Go to the Edit menu and choose Copy, then Paste as a New Image. You will need to repeat this process to copy each tube from the sheet you wish to use on your stationary.
?
b) Some pixel tube sheets do not have the individual tubes on their own layers. If this is the case with the sheet you are using, you can use either your selection or freehand selection tools to trace around the tube you wish to copy. Once you have "marching ants" around the tube you wish to use, go to Edit, then Copy and then Paste as a New Layer. You will need to repeat this process to copy each tube from the sheet you wish to use on your stationary.
?
Note! When you paste each pixel tube or accent as a new image, it may or may not have excess empty space surrounding it. If your tube has excess space around it:
?
Activate your magic wand tool and click the empty space. Go to Selections and choose Invert. When the marching ants are surrounding your tube, go to Image, Crop to Selection. Once you've copied your pixel tubes and accents, place each on your workspace and move to step 2.
?
Step 2: Prepare your?airbrushed side border!
?
1. File, New:
?
Width: 15 pixels.
Height: 200 pixels.
Image Characteristics: Raster Background.
Color Depth: 16 Million Colors (24 Bit).
Color: Transparent Checked.
?
2. From your medium size pixel tube you've chosen, using your eye dropper tool, choose a light color for your foreground and a medium to dark color for your background.
?
3. Activate your airbrush tool with these settings:
?
Tool preset: Fuzz Soft.
Shape: Round.
Size: 30.
Step: 5.
Density: 100.
Rotation: 0.
Opacity: 100.
Blend mode: Normal.
Rate: 5.
?
*Note: If you are having difficulty seeing this small canvas, go to View, Zoom, Zoom In until it is a size you are able to see.
?
4. Beginning at the top of your 15x200 pixel canvas, hold your left mouse key while filling the area with a light airbrush.
?
5. Image, Canvas Size:
?
Width: 30 pixels.
Height: 200 pixels.
Placement: Middle arrow.
Leave all numbers at their default settings.
?
6. Swap your foreground and background colors in your material palette so your darker color is in the foreground.
?
7. Activate your pen tool with the following settings:
?
Mode: Draw Lines and Polylines checked.
Create on Vector checked.
Line Style: Dashed (or your line style of choice).
Width: 2.00 pixels.
Anti-alias checked.
?
8. While holding down your shift key, draw a line along the left edge of your airbrushed line.
?
?
9. Layers, Convert To Raster Layer.
?
10. Layers, Duplicate.
?
11. If your duplicated layer is a vector layer, go to Layers, Convert to Raster Layer. (Your duplicated layer may already be as a raster layer).
?
12. Image, Mirror. (If your left line is not at the edge of your airbrushed line, move it so that it is).
?
13. Layers, Merge, Merge Visible.
?
14. Effects, Image Effects, Seamless Tiling:
?
Tiling Method: Edge.
Direction: Vertical.
Width: 51.
Transition: 50.
?
Step 3: Add your pixel tubes!
?
15. Image, Canvas Size:
?
Width: 150 pixels.
Height: 200 pixels.
Placement: Left center.
Leave all numbers at their default settings.
?
?
16. Activate the copy of?your medium size pixel tube.
?
* If your medium size pixel tube is wider than 140 pixels or taller than 180 pixels, follow steps #16 through #18. If not, skip to step #19.
?
17. Image, Resize:
?
Width: 140 pixels maximum.
Height: 180 pixels maximum.
Lock Aspect Ratio Checked.
Resize All Layers Checked.
?
18. Adjust, Sharpness, Sharpen (if necessary).
?
19. Edit, Copy. Minimize your pixel tube copy.
?
20. Reactive your 150x200 pixel canvas.
?
21. Edit, Paste as a New Layer. Move your pixel tube to the place of your desire near your side border decoration.
?
?
22. Repeat steps?16 through?21 with each of the accent tubes you are using. If you are not using accent tubes, move to the next step.
?
?
23.?Close your bottom layer (your brushed line border).
?
?
24. Layers, Merge, Merge Visible.
?
25. Layers, View, View All. (Your bottom layer will be visible again).
?
26. Being sure your tubes are the active layer, add a drop shadow of your choice or use my example:
?
Effects, 3D Effects, Drop Shadow:
Vertical & Horizontal: 0
Opacity: 40
Blur: 5
Color: Black.
Shadow on new layer is not checked.
?
27. Layers, Merge, Merge Visible.
?
Step 4: Prepare your background canvas!
?
28. Image, Canvas Size:
?
Width:?1280 pixels (or your choice)
Height:?200 pixels.
Placement: Left Middle.
Leave all numbers at their default settings.
?
29. Layers, New Raster Layer.
?
30. Layers, Arrange, Send to Bottom.
?
31.?Floodfill your bottom layer with your color of choice (you may use your original light or dark color or choose a third color from your tube).
?
32. Adjust, Add/Remove Noise, Add Noise:
?
Uniform checked.
Noise: 6%
Monochrome checked.
?
33. Effects, Texture Effects, Blinds:
?
Width: 2
Opacity: 20
Color: Color of your choice.
(For example, in one letter, I used my original dark color on a third chosen light color).
Horizontal and Light from Top both checked.
?
34. Layers, New Raster Layer.
?
35. Layers, Arrange, Bring To Top.
?
36. Add your watermark and place it on your canvas in the place you wish.
?
37. Add text or additional items as desired now.
?
38. Layers, Merge, Merge All Flatten.
?
?
Step 5 : Take your stationary to Letter Creator!
?
39.?File, Export, Jpeg Optimizer, Compression Value 25. Name your file.
?
40. Open Incredimail Letter Creator and create a new stationary using your saved background canvas.
?
Notes:
?
When making your footer...
?
Please remember to give credit to any artist's work which you may have used in your stationary.
?
Please also provide a link to my group when using one of my tutorials:?
?
Thank You very much to my tutorial testers.
Tut #7

 

开云体育

Mosh Tiler Tutorial by
?
?
Any resemblance to another tutorial is purely coincidental and unintended. Please do not re-copy this tutorial or add it to any website without my knowledge and permission.
?
Skill level: Advanced Beginner. This tutorial assumes you know how to install and use plugins in Paint Shop Pro. This? tutorial was written using PSP?version #10.
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Filters:
Filter Factory C (Cyber Mosh)
Filter Factory S (Fractal Tiler)
()
?
Materials:
A tube or graphic of your choice. (Note: If using a graphic you may want to apply a mask to your image. This step is not included in the following tutorial.)
?
Let's begin!
?
1. Open tube or image of choice in Paint Shop Pro.
?
2. Duplicate image and close original.
?
3. Resize duplicate image to a maximum of 300 pixels in width and/or a maximum of 350 pixels in height.
?
4. Edit, copy.
?
5. Using your eye dropper tool, choose two colors of different tones from your image - a lighter color for the foreground and a medium to dark color for the background.
?
6. Minimize image for later use.
?
7. Open new transparent image 1280 x?height of image?+ 25?pixels. (e.g., If the image you have chosen is 350 pixels in height, make the new canvas 375 pixels in height).
?
8. Selections, Select all, paste into selection, select none.
?
9.?Effects, image effects, seamless tiling at default setting.
?
10. Layers, new raster layer, send to bottom.
?
11. Floodfill bottom layer with your background color.
?
12. Layers, merge, merge visible.?
?
13.?Adjust, Blur, Gaussian Blur, 10.
?
14. Apply the filter Filter Factory C, Cyber Mosh with these settings:
?
Grid Setting: 35
Distortion: 130
Intensity: 205
Line Width: 0
?
15. Apply the filter Filter Factory S,?Fractal Tiler?at these settings:
?
Random Seed 1: 150
Random Seed 2: 255
?
16.?Effects, image effects, seamless tile, default settings.
?
17. Layers, new raster.
?
18. Floodfill the new layer of your canvas with your foreground color.
?
19. Reduce the opacity of your floodfilled layer to your liking, being sure to make the canvas "text friendly".
?
20. Edit, paste as a new layer. Move your image to the left of the canvas.
?
21. Add an inner bevel to your tube or graphic if you wish.
?
ex:
Bevel #2,
Width 10
smoothness 40
depth 1
ambience 5
shine 5
color white
angle 315
intensity 50
elevation 30
?
Or an inner bevel of your choice.
?
22. Effects, 3D effects, drop shadow:
?
Vertical and horizontal: 1
Opacity: 80
Blur: 12
Shadow on new layer unchecked.
?
Or your drop shadow of choice.
?
23. Sharpen the graphic or tube if necessary; adjust, sharpness, sharpen.
?
24. Layers, add new raster layer and apply your watermark and place it where you want it.
?
25. Layers, merge all flatten.
?
26. File, export, jpeg optimizer set at 25. Name file and click save.
?
27. Open Incredimail Letter Creator and create a new stationary using your saved background canvas.
?
Notes:
?
When making your footer...
?
Please remember to give credit to any artist's work which you may have used in your stationary.
?
Please also provide a link to my group when using one of my tutorials:?
?
Thank You very much to my tutorial testers; Pat, Lane, Francine, Becky, Joyce, Betty, KD, Belinda, Judy, Crystal.



Image10.jpg

Tut #6

 

开云体育

?
Tiny Pixel SB?Tutorial by
?
?
Any resemblance to another tutorial is purely coincidental and unintended. Please do not re-copy this tutorial or add it to any website without my knowledge and permission.
?
Skill level: Advanced Beginner. This tutorial assumes you know how to use basic menu tools and functions in Paint Shop Pro. This? tutorial was written using PSP?version #12.
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Materials:
A "Tube Sheet" or three complimentary pixel tubes of your choice. You may choose to use two images or four images. Its up to you.??
?
Let's begin!
?
1. Open?your tube sheet or each of your chosen tubes.
?
2. Duplicate image(s) and close original(s).
?
2a. If you are using a "tube sheet",?you will need to cut, copy and paste?each? of your chosen items from the sheet. Copy and paste each as new images and arrange them on your workspace.?
?
3. Resize each chosen pixel image to a maximum width of 75 pixels and/or a maximum height of 100 pixels.?
?
4. For each: Adjust, Sharpness, Sharpen (if necessary).
?
5. Beginning with one of your copied pixel images, using your magic wand, click the transparent space around the image.
?
(i) Selections, Invert,
(ii) Image, Crop to Selection,
(iii) Selections, select none.
?
Repeat this process with your other two pixel images. This will ensure you do not have any excess space around them.
?
6. File, New, 90x400 pixels, transparent.
?
7. From your tube(s), choose a light color for your foreground and a complimentary dark color for your background.
?
8.?Floodfill your 90x400 canvas with your background (dark)color.
?
9.?Adjust, Add/Remove Noise, Add Noise, Gaussian, 8%, Monochrome checked.
?
10.?Activate one of your chosen pixel images. Duplicate it and on the duplicate copy:
?
(i) Adjust, Blur, Gaussian Blur, Radius: 10%
?
11. Effects,?Image effects, Seamless Tiling, Default settings.
?
12.??Lower the opacity of your blurred image to 50%.?
?
13. ?Layers, Merge, Merge All Flatten.
?
14. Change your foreground to pattern, choosing your blurred image.
?
Angle: 0
Scale: 100
Texture not checked.
?
15.?Working on your 90x400 canvas, choose your selection tool and go to custom selection:
?
Top: 0
Left: 10
Right: 20
Bottom: 400
?
16. Layers, New Raster Layer.
?
17. Floodfill your selected area with your pattern.
?
18.?Selections, Select None.
?
19. Effects, 3D Effects, Drop Shadow:
?
Vertical and Horizontal: 1
Opacity: 50%
Blur: 5
Color: Black
Shadow on new layer is NOT checked.
?
Repeat drop shadow changing vertical and horizontal to -1.
?
20. Effects, Image Effects, Seamless Tiling, Edge, Vertical, Default settings.
?
21. Layers, Duplicate.
?
22.?Image, Mirror.?
?
23. Layers, Merge, Merge Visible.
?
24. Image, Canvas Size:
?
Width: 100 pixels
Heigh: 400 pixels
Center?arrow placement checked.
?
25. Layers, New Raster Layer, Arrange, Send to Bottom.
?
26.?Change your foreground back to your light color.?
?
27. Floodfill the bottom layer with your foreground color.
?
28. Image, Add Borders, Symmetric *not* checked:
?
Top: 0
Left: 2
Bottom: 0
Right:2
?
Color: Your Dark Color.
?
29. Layers, Promote Background Layer.
?
30. Image, Canvas Size:
?
Width: 1280 pixels (or your choice)
Height: 400 pixels
Left middle arrow checked.
Change the left placement number to 10.
?
31. Effects, 3D Effects, Drop Shadow, Same Settings as previously used.
?
32. Effects, Image Effects, Seamless Tiling, Edge and Vertical checked, Default.
?
33. Layers, New Raster Layer. Arrange, Send to Bottom.
?
34. Floodfill bottom layer with your foreground color.
?
35.?Adjust, Add/Remove Noise, Add Noise, Gaussian 8%, Monochrome checked.
?
36. Make the top layer of your background canvas active.
?
37. Activate one of your pixel tubes. Edit, Copy. Paste as a new layer on your canvas and move it to the left, placing it between your patterned stripes.
?
Repeat this same process with your other two pixel images. Place them vertically atop one another in the sideborder decoration.
?
38. Close off your bottom layer and your strip layer so only the layers of your tubes are visible. Go to Layers, Merge, Merge Visible. Open the bottom and striped layers.
?
39. Activate the layer with your pixel tubes. Add a drop shadow to your pixel images.
?
Ex: ?
?
Vertical and Horizontal: 1
Opacity: 40%
Blur: 9
Color: Black
Shadow on new layer is NOT checked.
?
Or use a drop shadow of your choice.
?
40. Layers, New Raster Layer, Bring To Top.
?
41. Add?your watermark.
?
42. If you wish to add text or other embellishements, do so now.
?
43. Layers, Merge, Merge All Flatten.?
?
44. File, Export, Jpeg Optimizer, Compression Value 25. Name your file.
?
45. Open Incredimail Letter Creator and create a new stationary using your saved background canvas.
?
Notes:
?
When making your footer...
?
Please remember to give credit to any artist's work which you may have used in your stationary.
?
Please also provide a link to my group when using one of my tutorials:?
?
Thank You very much to my tutorial testers.
?



Image24.jpg

Tut #5

 

开云体育

Blur and Blast It?Tutorial
?
March?2009
?
?
Any resemblance to another tutorial is purely coincidental and unintended.?
?
Sharing of this tutorial is not permitted.
?
This tutorial is for use by paid members only. Your membership may be revoked without refund if you are found to have shared my members only section tutorials and other items.
??
Do not re-copy, translate?or add this tutorial in part or whole. Do not add or upload to any websites.
?
Skill level: Beginner.
?
This tutorial assumes you know how to use?most (if not all)?of the menu tools and functions in Paint Shop Pro. It assumes you are able to install plugins. ?
?
This?tutorial was written using PSP?version #10.
?
Remember To Save Your Work Often!
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Plugins:
Toadies, Blast 'n Blur ()
DSB Flux, Blast ()
?
Materials:
A tube
?
Optional:
Accents
?
Settings remain the same unless otherwise noted.
?
Let's Begin!
?
1. Open your tube.
?
2. Duplicate (shift +D) your tube. Close the original.
?
3. Choose a?medium to dark color for your background.
?
4. Image, Resize:
?
Width: No more than?300 pixels
Height: No more than 350 pixels
Resample Using: Smartsize
Lock Aspect Ratio: Checked
Resize All Layers: Checked
?
5. Adjust, Sharpness, Sharpen (if necessary).
?
6. Edit, Copy.
?
7. Minimize your tube.
?
8. File, New:
?
Width: 1700 pixels (or width of your choice for your screen size)
Height: Height of your tube plus 50 pixels
Resolution: 200.00 pixels/inch
Raster Background: Checked
Transparent: Checked
?
9. Selections, Select All.
?
10. Edit, Paste Into Selection.
?
11. Selections, Select None.
?
12. Layers, New Raster Layer.
?
13. Layers, Arrange, Send to Bottom.
?
14.?Activate your Flood Fill tool with these settings:
?
Match Mode: RGB Value
Tolerance: 20
Use All Layers: Not Checked
Blend Mode: Normal
Opacity: 100
?
Flood fill your new bottom layer with your medium to dark background color.
?
15. Layers, Merge, Merge Visible. ?
?
16. Effects, Image Effects, Seamless Tiling, Default settings.
?
17. Adjust, Blur, Gaussian Blur, Radius 20.
?
18. Effects, Plugins, Toadies, Blast 'n Blur:
?
X-effect: 80
Y-effect: 0
?
19. Effects, Plugins, DSB Flux, Blast:
?
Direction: Right
Percentage: 20
?
20. Effects, Image Effects, Seamless Tiling.
?
21. Layers, New Raster Layer.
?
22. Flood fill with your background color.
?
23. Lower the opacity of this layer until the canvas is both text-friendly and your patterned layer is still visible.
?
24. Layers, Merge, Merge Down.
?
25. Adjust, Add/Remove Noise, Add Noise:
?
Gaussian: Checked
Noise: 5
Monochrome: Checked
?
26. Effects, Plugins, DSB Flux, Blast
?
Direction: Left
?
27. Effects, Image Effects, Seamless Tiling.
?
28. Edit, Paste As New Layer (your tube).
?
29. Move your tube to the left side of your canvas.?
?
30. Effects,?3D Effects, Drop Shadow:
?
Vertical Offset: 0
Horizontal Offset: 0
Opacity: 50
Blur: 15
Color: Black
Shadow On New Layer: Not Checked
?
Or use a drop shadow of your?preference.
?
*Do not add a drop shadow to a misted tube.
?
31. Add accents, text or any other embellishments you wish. Remember to add drop shadows, inner bevels, etc if needed or desired.
?
32. Add?any necessary artist credits.
?
33. Add your watermark.
?
34. Layers, Merge, Merge Visible.???
?
35. File, Export, Jpeg Optimizer, Compression Value 15 (or your choice), Save, Name your file.
?
36. Open Incredimail Letter Creator and assemble your new stationery as you normally would.
?
Notes:
?
Please remember to give credit to any artist's work which you may have used in your work. If the TOU requires use of a license number, e.g., don't forget to include it.
?
My Members Section tutorials must be linked to my website:
Please note in your footer the name of the tutorial and indicate you got it from my members section. Thanks!
?
You are welcome to share your results using Members Section tutorials but do not share the tutorials themselves.
?
Thank You very much to my tutorial testers for their hard work, dedication and encouragement.



TileForTuts.jpg

Tut #4

 

开云体育

Easily Embellished Tutorial
?
November 2,?2009
?
?
Any resemblance to another tutorial is purely coincidental and unintended.?
?
Sharing of this tutorial is permitted only in its original format.
?
Do not re-copy, translate?or add this tutorial in part or whole. Do not add or upload to any websites.
?
Skill level: Beginner.
?
This tutorial assumes you know how to use?most?of the basic menu tools and functions in Paint Shop Pro.
?
This?tutorial was written using PSP?version #12 (PSPX2). It will work in other versions of PSP.
?
Remember To Save Your Work Often!
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Plugins:
None required.
?
Materials:
?
A tube of your choice.
Accents if desired.
?
Settings remain the same unless otherwise noted.
?
Part 1: Preparations
?
1. Open your tube. Duplicate (shift +D) your image. Close the original.
?
2. Crop your tube in whatever way(s) may be necessary.
?
3. Choose a light color from your image for your foreground and a?medium color for your background.
?
4. Image, Resize:
?
Width: No more than?300 pixels
Height: No more than?400 pixels
Resample Using: Smartsize
Lock Aspect Ratio: Checked
Resize All Layers: Checked
?
5. Adjust, Sharpness, Sharpen (if necessary).
?
Part 2: Create Your Background
?
1. Image, Canvas Size:
?
Width:?1800 pixels
Height:?Height of your tube + 50 pixels?
Lock Aspect Ratio: Not Checked
Placement:?Left Middle Arrow Checked
Numbers: Default except change left number to 15.
?
2. Effects, 3D Effects, Drop Shadow:
?
Vertical Offset: 0
Horizontal Offset: 0
Opacity: 40
Blur: 10
Color: Black
Shadow On New Layer: Not Checked
?
3. Layers, Duplicate.
?
4. Effects, Texture Effects, Moasic -?Antique:
?
?
5. Layers, Arrange, Move Down.
?
6. Layers, New Raster Layer.
?
7. Layers, Arrange, Send To Bottom.
?
8. Activate your Flood Fill tool with these settings:
?
Match Mode: RGB Value
Tolerance: 20
Use All Layers: Not Checked
Blend Mode: Normal
Opacity: 100
?
9. Flood fill your?bottom layer with your?light color.
?
10. Adjust, Add/Remove Noise, Add Noise:
?
Gaussian: Checked
Noise: 8%
Monochrome: Not Checked
?
11. Effects, Texture Effects, Weave:
?
Gap Size: 2
Width: 10
Opacity: 10
Weave Color: Your medium color
Gap Color: Your medium color
Fill Gaps: Checked.
?
12. Layers, New Raster Layer.
?
13. Flood fill with your light color. Lower the opacity of this layer until your background is text-friendly and the background pattern still shows through.
?
14. Adjust, Add/Remove Noise, Add Noise.
?
15. Effects, Texture Effects, Blinds:
?
Width: 3
Opacity: 10
Color: White
Horizontal: Checked
Light From Left/Top: Checked
?
16. Add accents, embellishments, text, etc as desired.
?
17. Add your watermark and any necessary?artist credits.
?
18. Layers, Merge, Merge Visible.
?
19. File, Export, Jpeg Optimizer, Compression Value 15 (or your preference), Click OK, Save.
?
20. Open Incredimail Letter Creator and assemble your file as a new stationery.?Please remember to give credit to any artist's work which you may have used in your work. If the TOU requires use of a license number, e.g., don't forget to include it.
?
My?tutorials must be linked to my website: ?and my group at
Please note in your footer the name of the tutorial. Thanks!
?
Thank You very much to my tutorial testers. They bless me so much with their time, talent and effort in helping make these tutorials the best they can be.



Image1.jpg

Tut #3

 

开云体育

Boxes, Lines & Plaid Members Tutorial
?
July 18,?2009
?
?
?
?
Any resemblance to another tutorial is purely coincidental and unintended.?
?
Sharing of this tutorial is not permitted.
?
This tutorial is for use by paid members only. Your membership may be revoked without refund if you are found to have shared my members only section tutorials and other items.
?
The artwork used in my samples is by , and?.?No copyright infringements are intended.
?
Do not re-copy, translate?or add this tutorial in part or whole. Do not add or upload to any websites.
?
Skill level: Advanced Beginner.
?
This tutorial assumes you know how to use?most (if not all)?of the menu tools and functions in Paint Shop Pro, including installation and use of outside plugins.
?
This?tutorial was written using PSP?version #12 (PSPX2). Some menu pathways may be different in other versions of PSP.
?
Remember To Save Your Work Often!
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Plugins:
Namesuppressed, Plaid Lite ()
?
Materials:
?
A tube of your choice (a tube that is as wide as it is tall may yield best results).
Accents if desired.
?
Preparations:
?
Install plugin if necessary.
?
Note: I keep my "Rulers" active while working in PSP. It may be helpful for you to do the same while using my tuts. Go to: View, Rulers.
?
Settings remain the same unless otherwise noted.
?
Let's Begin!
?
Part 1: Preparations
?
1. Open your tube. Duplicate (shift +D) your tube. Close the original.
?
2.?Image, Resize:
?
Width: No more than?260 pixels
Height: No more than?300 pixels
Resample Using: Smartsize
Lock Aspect Ratio: Checked
Resize All Layers: Checked
?
3. Adjust, Sharpness, Sharpen (if necessary).
?
4. Use your Eye Dropper Tool to choose a?very light?color for your foreground. Choose a darker shade of the same color for your background.
?
Note: We will use another color later. Refer to your original foreground color as Color #1 and your original background color as Color #2. If your version of PSP does not automatically remember colors, make a "swatch" of your originally chosen colors.
?
Part 2: Create Your Sideborder
?
1. Image, Canvas Size:
?
Width:?Width of your tube +?40 pixels
Height:?Height of your tube + 50 pixels?
Lock Aspect Ratio: Not Checked
Placement:?Center Arrow Checked
Numbers: Default
?
2.?Effects, 3D Effects, Drop Shadow:
?
Vertical Offset: 0
Horizontal Offset: 2
Opacity: 35
Blur: 12
Color: Black
Shadow On New Layer: Not Checked
?
Note: Do not add a drop shadow to a misted tube. However, note that you will need to refer to the settings given here for future steps.
?
3. Layers, New Raster Layer.
?
4. Layers, Arrange, Send To Bottom.
?
5. Activate your Flood Fill Tool with these settings:
?
Match Mode: RGB Value
Tolerance: 20
Use All Layers: Not Checked
Blend Mode: Normal
Opacity: 100
?
Flood fill your?new layer with your foreground color.?
?
6. Adjust, Add/Remove Noise, Add Noise:
?
Gaussian: Checked
Noise: 7%
Monochrome: Checked
?
7. Effects, Plugins, Namesuppressed, Plaid Lite:
?
Pattern: 100
Rotate: 0
Zoom: 200
Colors: 0
High Quality: Checked
Make Seamless: Not Checked
?
8. Effects,?Edge Effects, Enhance.
?
Note: You may choose to?repeat this step.
?
?
9. Activate your Selection Tool with these settings:
?
Selection Type: Rectangle
Mode: Add (Shift)
Feather: 0
Anti-Alias: Checked.
?
10.?Starting at 30, 30 on your canvas, stretch with your mouse to 100, 100 to create a rectangular selection at the top left of your canvas.
?
Note: If you have a taller than wide image, you may not be able to see your selected area once its been flood filled in the next step. Don't be concerned - there is an opportunity ahead to move it.
?
Note: You may need to "Zoom In" on your image while drawing the selection.
?
11. Layers, New Raster Layer.
?
12.?Flood fill the selected area with your background color.
?
13. Selections, Select None.
?
14. Effects, 3D Effects, Drop Shadow:
?
Horizontal: 0
Blur: 20
?
15. Layers Palette, Close Tube Layer (click on the "eye").
?
Note: If your shape is not drawn in the place you wish it to be, use your Move Tool now to re-position it as desired. Also, if your shape is too large, resize it now. See my screenshots below step #21 for guidance.
?
16.?Layers, Duplicate.
?
17. Image, Mirror
?
18.?Layers, Merge, Merge Down.
?
19.?Layers, Duplicate.
?
20. Image, Flip.
?
21. Layers, Merge, Merge Down.
?
?
?
22. If necessary, make your layer with your four dark colored shapes active.
?
23.?Effects, Artistic Effects, Colored Edges:
?
Luminance: 50
Blur: 5
Color: Your light color
Intensity: 20
?
Note: If these settings do not significantly lighten the color of your shapes, undo the step and repeat trying?a higher number for the luminance setting.
?
24. Using your eye dropper tool, left click on one of the shapes. The new color will be your new foreground color. We will refer to this as Color #3.
?
25. Activate your Rectangle Tool with these settings:
?
Mode: Draw Rectangle
Show Nodes: Not Checked
Create On Vector: Checked
Horizontal & Vertical Radius: 0.00
Line Style: Solid
Width: 3.0 pixels
Anti-alias: Checked
Join: Miter Join
Miter Limit: 15
?
26. Null your background color.
?
27.?Draw a rectangular?shape around your four?shapes. Leave approximately?15-20 pixels space between your new rectangle and your four shapes.
?
28. Objects, Align, Center In Canvas.
?
29. Layers, Convert To Raster Layer.
?
?
30. Effects, 3D Effects, Drop Shadow:
?
Blur: 5
?
31. Change your foreground back to your original light color (Color #1). Un-null your background color (Color #2).?
?
32. Layers Palette, unclick the "eye" on your tube layer to make it visible again.
?
33. Layers, Merge, Merge Visible.
?
?
34. Image, Add Borders:
?
Symmetric: Not Checked
Top: 0
Left: 2
Right: 2
Bottom: 0
Color: Color #3
?
35. Image, Add Borders:
?
Left: 1
Right: 1
Color: Color #1
?
36. Image, Add Borders:
?
Left: 2
Right: 2
Color: Color #3
?
37.?Layers, Promote Background Layer.
?
38. Image, Canvas Size:
?
Width: Add 20 pixels
Height: Height of your canvas
Placement: Middle Center Arrow Checked
Numbers: Default
?
39. Effects, 3D Effects, Drop Shadow:
?
Opacity: 75
Shadow On New Layer: Checked
?
40. Effects, Image Effects, Seamless Tiling:
?
Tiling Method: Edge
Direction: Vertical
Width: 51
Transition: 50
?
41. Layers, New Raster Layer.
?
42. Layers, Arrange, Send To Bottom.
?
43. Flood fill with your background color (Color #2).
?
44. Adjust, Add/Remove Noise, Add Noise.
?
45. Image, Add Borders:
?
Left: 1
Right: 1
Color: Color #1
?
46. Layers, Promote Background Layer.
?
?
Part 3: Create Your Stationery?
????
1. Image, Canvas Size:
?
Width: 1800 pixels (or your preference)
Height: Height of your canvas
Lock Aspect Ratio: Not Checked
Placement: Middle Left Arrow Checked
Numbers: Default but change left number to 10.
?
2. Effects, 3D Effects, Drop Shadow.
?
3. Effects, Image Effects, Seamless Tiling.
?
4. Layers, Merge, Merge Visible.
?
5. Layers, New Raster Layer.
?
6. Layers, Arrange, Send To Bottom.
?
7.?Flood fill your new bottom layer with your foreground color (Color #1).?
?
8. Adjust, Add/Remove Noise, Add Noise.
?
9. Effects, Plugins, Namesuppressed, Plaid Lite.
?
10. Effects, Edge Effects, Enhance.
?
Note: Repeat this step if desired.
?
11. Effects, Image Effects, Seamless Tiling, Default.?
?
12. If necessary, add a new raster layer and flood fill it with?your?foreground color and then reduce its opacity to create a more text-friendly background.?
?
13.?Add text, accents or embellishments now if you wish.
?
14.?Add your watermark, artist credits and any additional accents or embellishments as desired.
?
15. Layers, Merge, Merge All(Flatten).?
?
16. File, Export, Jpeg Optimizer, Compression Value 15 (or your preference), Click OK, Save.?
?
Part 4: Finishing Up!
?
1. Open Incredimail Letter Creator and assemble your file as a new stationery.?
?
2. Please remember to give credit to any artist's work which you may have used in your work. If the TOU requires use of a license number, e.g., don't forget to include it.
?
3. My Members Section tutorials must be linked to my website:
Please note in your footer the name of the tutorial and indicate you got it from my members section. Thanks!
?
You are welcome to share your results using Members Section tutorials but do not share the tutorials themselves.
?
Thank You very much to my tutorial testers. They bless me so much with their time, talent and effort in helping make these tutorials the best they can be.



Image1.jpg

Tut #2

 

开云体育

Bubbly Bars?SB & BG Members Tutorial
?
August 15,?2009
?
?
?
Any resemblance to another tutorial is purely coincidental and unintended.?
?
Sharing of this tutorial is not permitted.
?
This tutorial is for use by paid members only. Your membership may be revoked without refund if you are found to have shared my members only section tutorials and other items.
?
Do not re-copy, translate?or add this tutorial in part or whole. Do not add or upload to any websites.
?
Skill level: Advanced Beginner.
?
This tutorial assumes you know how to use?most (if not all)?of the menu tools and functions in Paint Shop Pro. It assumes you are familiar with installing and using outside plugins.
?
This?tutorial was written using PSP?version #12 (PSPX2).
?
Note: I keep my "Rulers" active while working in PSP. It may be helpful for you to do the same while using my tuts. Go to: View, Rulers.
?
Remember To Save Your Work Often!
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Plugins:
Ecosse, Flutter ()
Kang 4, bubblecross Waves ()
?
Materials:
?
A tube of your choice (one that is taller than wide).
Accents if desired.
?
Preparations:
?
Install plugins if necessary.
?
Settings remain the same unless otherwise noted.
?
Let's Begin!
?
Part 1: Preparations
?
1. Open?your tube. Duplicate (shift +D) your tubes. Close the original.?
?
2. Image, Resize:
?
Width: No more than?300 pixels
Height: No more than?400 pixels
Resample Using: Smartsize
Lock Aspect Ratio: Checked
Resize All Layers: Checked
?
3. Adjust, Sharpness, Sharpen (if necessary).
?
4.?Use your Eye Dropper Tool to choose a light color for your foreground and a complementary darker color?for your background.
?
Part 2: Create Your Side Border
?
1.?Image, Canvas Size:
?
Width:?1800 pixels
Height:?450 pixels
Lock Aspect Ratio: Not?Checked
Right Middle Arrow: Checked
Numbers: Change right number to 35. Allow top, left and bottom numbers to adjust on their own.
?
2. Effects, 3D Effects, Drop Shadow:
?
Vertical Offset: 0
Horizontal Offset: -2
Opacity: 40
Blur: 12
Color: Black
Shadow On New Layer: Not Checked
?
*Do not add a drop shadow to a misted tube.
?
3. Selection Tool, Custom Selection:
?
Top: 0
Left: 1775
Right: 1800
Bottom: 450
?
4. Layers, New Raster Layer.
?
5.?Activate your Flood Fill Tool with these settings:
?
Match Mode: RGB Value
Tolerance: 20
Use All Layers: Not Checked
Blend Mode: Normal
Opacity: 100
?
Flood fill your?selected area with your background color.
?
7. Effects, Texture Effects, Blinds:
?
Width: 2
Opacity: 15
Color: White or your light color
Horizontal: Not Checked
Light From Left/Top: Checked
?
8.?Selections, Select None.
?
9. Effects, 3D Effects, Drop Shadow:
?
Blur: 5
?
10. Effects, Image Effects, Seamless Tiling:
?
Tiling Method: Edge
Direction: Vertical
Width: 51
Transition: 50
?
11. Layers, Arrange, Send To Bottom.
?
12. Selection Tool, Custom Selection:
?
Top: 0
Left: 1750
Right: 1800
Bottom: 450
?
13.?Layers, New Raster Layer.
?
14. Layers, Arrange, Send To Bottom.
?
15. Flood fill with your foreground color.
?
16. Selections, Select None.
?
17. Effects, Texture Effects, Blinds:
?
Horizontal: Checked
?
18. Effects, 3D Effects, Drop Shadow:
?
19. Effects, Image Effects, Seamless Tiling.
?
20. Layers, New Raster Layer.
?
21. Layers, Arrange, Send To Bottom.
?
22. Selection Tool, Custom Selection:
?
Top: 0
Left: 1650
Right: 1800
Bottom: 450
?
23. Change your foreground to gradient:
?
Style: Sunburst
Angle: N/A
Repeats: 1
Invert: Not Checked
Center Point:
Horizontal: 50
Vertical: 50
Focal Point:
Horizontal: 50
Vertical: 50
Link Center And Focal Points: Checked
Texture: Not Checked
?
24. Floodfill your new selected area with your gradient.
?
25. Selections, Select None.
?
26.?Effects, 3D Effects, Drop Shadow.
?
27. Effects, Image Effects, Seamless Tiling.
?
28. Layers, New Raster Layer.
?
29. Layers, Arrange, Send To Bottom.
?
30. Selection Tool, Custom Selection:
?
Top: 0
Left: 1550
Right: 1800
Bottom: 450
?
31. Change foreground back to your light color.
?
32. Flood fill selected area with your foreground color.
?
33. Selections, Select None.
?
34. Adjust, Add/Remove Noise, Add Noise:
?
Random: Checked
Noise: 5
Monochrome: Checked
?
35. Effects, Plugins, Kang 4, bubblecross Waves:
?
X Frequency: 226
Y Frequency: 226
X Amplitude: 23
Y Amplitude: 23
bubble<->cross: 255
?
36. Effects, Image Effects, Seamless Tiling.
?
37. On your Layers Palette, highlight your tube layer. If necessary, bring your tube to the top: Layers, Arrange, Bring To Top.
Click the "eye" on this layer to hide it.
?
38. Click to activate another of your layers on your Layer Palette. Layers, Merge, Merge Visible.
?
39. Effects, 3D Effects, Drop Shadow:
?
Shadow On New Layer: Checked
?
40. Effects, Image Effects, Seamless Tiling.
?
41. Layers, Merge, Merge Visible.
?
42. Click the "eye" on your tube?layer to unhide it.
?
You should now have two layers.
?
?
Part 3: Create Your Background
????
1. Layers, New Raster Layer.
?
2. Layers, Arrange, Send To Bottom.
?
3. Flood fill with your your choice of either your foreground or background?color.
?
4. Adjust, Add/Remove Noise, Add Noise.
?
5. Effects, Plugins, Kang 4, bubblecross Waves.
?
6. Effects, Plugins, Ecosse, Flutter, Default Settings.
?
?
7.?Effects, Image Effects, Seamless Tiling, Default.
?
Steps 8 - 11: Optional: If your background is not "text friendly":
?
8. Layers, New Raster Layer.
?
9. Flood fill with your chosen color.
?
10. Lower the opacity of this layer until your background is both text friendly and your pattern shows through.
?
11.?Layers, Merge, Merge?Down.?
?
12.?Position your tube as desired. Add text, accents or embellishments now if you wish.
?
13.?Add your watermark, artist credits and anything else?as desired.
?
14. Layers, Merge, Merge All(Flatten).?
?
15. File, Export, Jpeg Optimizer, Compression Value 15 (or your preference), Click OK, Save.?
?
Part 4: Finishing Up!
?
1. Open Incredimail Letter Creator and assemble your file as a new stationery.
?
Note: Change Image Position to "Top Right" in LC.?
?
2. Please remember to give credit to any artist's work which you may have used in your work. If the TOU requires use of a license number, e.g., don't forget to include it.
?
3. My Members Section tutorials must be linked to my website:
Please note in your footer the name of the tutorial and indicate you got it from my members section. Thanks!
?
You are welcome to share your results using Members Section tutorials but do not share the tutorials themselves.
?
Thank You very much to my tutorial testers. They bless me so much with their time, talent and effort in helping make these tutorials the best they can be.



Image1.jpg

Tut #1

 

开云体育

?
Corners And Grid Sideborder?Tutorial
?
April 20,?2009
?
?
Any resemblance to another tutorial is purely coincidental and unintended.?
?
Sharing of this tutorial is not permitted.
?
This tutorial is for use by paid members only. Your membership may be revoked without refund if you are found to have shared my members only section tutorials and other items.
?
Artwork sampled in my tutorial is from???
?
Do not re-copy, translate?or add this tutorial in part or whole. Do not add or upload to any websites.
?
Skill level: Advanced Beginner.
?
This tutorial assumes you know how to use?most (if not all)?of the menu tools and functions in Paint Shop Pro, including installation and use of plugins.
?
This?tutorial was written using PSP?version #10.
?
Remember To Save Your Work Often!
?
Required Supplies:
?
Programs:
Paint Shop Pro ()
Incredimail Letter Creator ()
?
Plugins:
Toadies, 3D Grid ()
?
Note: If 3D Grid does not appear in your Toadies menu in PSP, download the individual filter by .
?
Materials:
?
SquaredCornersPatternSmall ()
Mask: Sidefade ()
A tube of your choice.
Accents if desired.
?
Preparations:
?
Settings remain the same unless otherwise noted.
?
Part 1: Preparations
?
1. Open your tube. Duplicate (shift +D) your tube. Close the original.
?
2. Choose a light color from your tube for your foreground and a?dark color for your background.
?
3. Image, Resize:
?
Width: No more than 250 pixels
Height: No more than 350 pixels
Resample Using: Smartsize
Lock Aspect Ratio: Checked
Resize All Layers: Checked
?
Note: Make a mental note of your resized tube's width. If you want, jot it down on a piece of paper.
?
4. Adjust, Sharpness, Sharpen (if necessary).
?
5. Edit, Copy.
?
6. Minimize your tube.
?
7. Open SquaredCornersPatternSm. Duplicate (Shift+D) to duplicate. Close the original. Minimize on your workspace.
?
Part 2: Create Your Sideborder
?
1. File, New:
?
Width:?50 pixels
Height: 400 pixels?
Resolution: 200.00 pixels/inch
Raster Background: Checked
Transparent: Checked
?
2. Change your foreground to pattern.
?
Pattern: SquaredCornersPatternSm_LMKuhn
Angle: 0
Scale: 100
Texture: Not Checked
?
3. Flood fill your 50x400 canvas with your foreground pattern.
?
4. Adjust, Color Balance, Manual Color Correction:
?
Preset Target Color: Not Checked
Freehand Selection: Not Checked
Manual Target Color: Checked
Souce Color: White
Target Color: Your Dark Color
Allow the numbers for the H, S and L to set themselves.
?
Note: If your colorized pattern side border is too dark, click on Shift+G. Sliding the arrow to the right will allow you to lighten the color. Click OK once you've achieved the color for your 50x400 strip you like best.
?
Also! If you do not have "Manual Color Correction" available to you in your version of PSP:
?
Open your dark color on your Material Palette to reveal it's properties. Write down the hue and saturation number. Go to Adjust, Hue&Saturation, Colorize and enter your dark color's hue and saturation numbers. Click OK and your patterned border will be colorized.
?
5. Using your mouse, hold down on the edge of your sideborder and expose grey space on all sides.
?
?
6. Change your foreground back to your light color.
?
7. Activate your Pen Tool with these settings:
?
Mode: Draw Lines and Polylines
Create On Vector: Checked
Line Style: Solid
Width: 2.00
Anti-Alias: Checked
?
Note: If you do not have your rulers showing, go to View, Rulers.
?
8. Starting at 25 pixels across, draw a vertical line?extending the entire height of your canvas (will be your light foreground color).
?
9. Objects, Align, Horz. Center In Canvas.
?
Note: If you wish to turn of your rulers, go to View, Rulers.
?
10. Layers, Convert To Raster Layer.
?
11. Image, Add Borders:

Symmetric: Not Checked
Top: 0
Left: 1
Right: 1
Bottom: 0
Color: Your Light Color
?
12. Layers, Promote Background Layer.
?
?
13.?Image, Canvas Size:
?
Width:?Width of your tube + 100* pixels
Height: 400 pixels
Lock Aspect Ratio: Not Checked
Placement: Left Middle Arrow Checked
Numbers: Default
?
* If you wish for your side border to be less narrow, add 75 pixels or 50 pixels to the width of your tube.
?
14. Effects, 3D Effects, Drop Shadow:
?
Vertical Offset: 2
Horizontal Offset: 2
Opacity: 50
Blur: 15
Color: Your Dark Color
Shadow On New Layer: Checked
?
15. Effects, Image Effects, Seamless Tiling:
?
Tiling Method: Edge
Direction: Vertical
Width: 51
Transition: 50
?
16. Layers, Merge, Merge Visible.
?
17. Layers, New Raster Layer.
?
18. Layers, Arrange, Move Down.
?
19. Activate your Flood Fill tool with these settings:
?
Match Mode: RGB Value
Tolerance: 20
Use All Layers: Not Checked
Blend Mode: Normal
Opacity: 100
?
Flood fill your new bottom layer with your foreground color.
?
20. Click the "eye" on your top layer in your Layers Palette to hide it.
?
?
?
21. Effects, Plugins, Toadies, 3D Grid:
?
Grid Size: 50
Strength: 4
Baseline: 0
?
22. Activate your Magic Wand tool with these settings:
?
Mode: Add(Shift)
Match Mode: RGB Value
Tolerance: 1
Use All Layers: Checked?
Contiguous: Checked
Feather: 0
Anti-Alias: Checked
Outside: Checked
?
Click the first upper left rectangle. Click every second full size rectangle after it.
?
23. Flood fill each selected rectangle with your dark color.
?
24. Selections, Select None.
?
25. Repeat step 22 clicking the full sized rectangles not filled with your dark color.
?
26. Flood fill the selected areas with your light color.
?
27. Selections, Select None.
?
?
28.?Now repeat the process to fill the bottom partial shown rectangles. (You do not need to fill the ones on the right side; they will be covered by your hidden top layer).
?
29. Effects, Image Effects, Seamless Tiling:
?
Tiling Method: Edge
Direction: Horizontal
Width: 51
Transition: 50
?
Optional Step:
?
Using your Magic Wand, click on the black grid. Select a third complimentary color from your tube and flood fill the area with that color. Select None and move on.
?
30.?Click the "eye" on your top layer to have it shown on your canvas again.
?
31. With your bottom layer active, go to Image, Mirror.
?
32. Layers, Load/Save Mask, Load Mask From Disk:
?
Mask: Sidefade
Source Luminance: Checked
Fit To Canvas: Checked
Invert Transparency: Checked
Hide All Mask: Checked
?
33. Layers, Merge, Merge Group.
?
34. Layers, Merge, Merge Visible.
?
?
Part 3: Your Background Canvas
?
1. Image, Canvas Size:
?
Width: 1700 pixels (or width of your preference for screen size)
?
2. Layers, New Raster Layer.
?
3. Layers, Arrange, Move Down.
?
4. Flood fill your bottom layer with your foreground color.
?
Note: If you have not already changed your foreground back to your light color, do so first.
?
5. Adjust, Add/Remove Noise, Add Noise:
?
Gaussian: Checked
Noise: 7%
Monochrome: Checked
?
6.?Edit, Paste As New Layer (should be your tube; if not in memory, open it and edit, copy and return to your canvas to paste it).
?
7. Layers, Arrange, Bring To Top.
?
8. Using the Move Tool, drag your tube to your left sideborder and position to your desire.
?
9. Effects, 3D Effects, Drop Shadow:

Vertical Offset: 0
Horizontal Offset: 0
Opacity: 60
Blur: 8
Color: Black
Shadow On New Layer: Not Checked
?
Or use a drop shadow of your preference.
?
?
10. Add text, accents or embellishments now if you wish.
?
11.?Add your watermark, artist credits and any additional accents or embellishments as desired.
?
12. Layers, Merge, Merge All(Flatten).?
?
13. File, Export, Jpeg Optimizer, Compression Value 15 (or your preference), Click OK, Save.
?
Part 4: Finish Up
?
1. Open Incredimail Letter Creator and assemble your file as a new stationery.
?
2. Please remember to give credit to any artist's work which you may have used in your work. If the TOU requires use of a license number, e.g., don't forget to include it.
?
3. My Members Section tutorials must be linked to my website:
Please note in your footer the name of the tutorial and indicate you got it from my members section. Thanks!
?
You are welcome to share your results using Members Section tutorials but do not share the tutorials themselves.
?
Thank You very much to my tutorial testers. They bless me so much with their time, talent and effort in helping make these tutorials the best they can be. ?



Image1.jpg

Hmm, Good Orange..NEW

 

开云体育




?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Rae's Stationery Creation _ ?Brenda's AL _? ?_ Mask_ ?Pretty Girly ?ACFC _ ?No Tut Used
?
?

Animation7.gif
hmm,_good_orange.imf
hmm,_good_orange.imf

PNG flowers and 2 more with flowers

 






























0547a0ef606f641d535c0350a59ea901.jpg
7f49fde750a447d8f86923acbea86e05.jpg
6958802839ae5720fb49502b355a109c.jpg
59ad44253980ba0c48b56daa5ebd27e7.jpg
60c2231fe87b2ecd773c5088cd80acf0.jpg
9e036c4baba830b91c9b9ee44741ca57 (1).jpg
3f215a0a93f17e209b98dc3a9f245b4d.jpg
9e036c4baba830b91c9b9ee44741ca57.jpg
82cae433df88a6c896ff050a3377e377.jpg

Fairy

 






3b610caa532741297742eec153e82664.jpg

Puzzle background

 






6e4bfee74fffceb7dac1371e494b8e6d.jpg

Clipart

 






e57ee769069ba5a98bf0fb967c8615c5.jpg

A Donkey Hello..NEW / Bee's Creations / Snowflakes and More Snowflakes

 

开云体育




?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Rae's Stationery Creation _ ?Mlena AL _ ?Tutorial ? Bee's Creation _ Snowflakes and More Snowflakes
?
?

Animation5.gif
a_donkey_hello.imf
a_donkey_hello.imf

My Try At Tut #2

 

开云体育




?
MY AI CREATION
Tut by Tinker Creations (Closed)
Font SP Coffee Break

9.jpg
ALE386~12.WAV
ALE386~12.WAV

Tut #1

 

开云体育

A BIT DOTTY?SB TUTORIAL
By ?
?

font is dc cookie journal

CRISSYP_Template72_(1).jpg

Tut #3

 

开云体育

STAMPING IT?SB TUTORIAL
By ?
?

font is lifes a beach

template55a-crissyp.jpg

Kittens..NEW

 

开云体育




?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Rae's Stationery Creation _ ?_ Rae's AL _ ?_ No Tut?Used
?
?
?

pic.gif

Hello, My Good Friend...NEW Dancing Snowflakes by Bee's creations

 

开云体育




?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Rae's?Stationery Creation _ ?_ Darlene's AL _ ?Tutorial ? Bee's Creations _ Dancing Snowflake
?
?

Animation1.gif
hello,_my_good_friend.imf
hello,_my_good_friend.imf

My Try At Tut #4

 

开云体育

?



?
MY AI CREATION
Tut by ACFC (Closed)
Font Orange Juice

7.jpg

301 - 320 of 11601