开云体育

So I download from HT. Get the image file, I'm able to change. Add, delete and do whatever you want, when I click on settings there's nothing there, just a blank page. No type of format, no error

Jim . . . <jimw7ry@...> wrote: If it's not supported, you can try one of these options, if available: 1. Look for a similar Yaesu radio in the list and try it, like maybe the model

Trying to download a Yaesu FT-270 and its not in the drop down. Ideas? -- Thanks and 73, Jim W7RY

I was all excited to use Chirp for my TM-271. Using the prior version of Chirp, not the new one, everything went well until I tried to write data to the radio, but nothing happens. I worked on it for

The Radioddity GA510 came with a cable. Never had a problem using the Radioddity/manufacturer’s programming software. Same-same the AnyTone AT778uv cable. That radio didn’t go into tx upon read

Nils . . . wrote: If you continue seeing that, you might report it at the official CHIRP website. We're a self-help group here and no one from the development team monitors this group. First, though,

I would suspected a device driver issue. Which chip is in your programming cable? Which operating system?

Maybe discussed before but as a new member . . . Recently used CHIRP to read from my Radioddity GA-510 HT. Took me a few minutes once I'd done that to discover that the radio had been sitting there in

Richard . . . <ag5m@...> wrote: I'm definitely not smarter than you about Linux but I am a casual user. I run a Windows application (an email program Forte Agent) in Linux Mint using

*I've upgraded to Linux Mint 21.1 on three laptops and have installed New Chirp on all of them.? When I go to download from my Baofeng UV-5R it appears to download (bar goes across to the end) and

Tiny fraction mic/phone plug "click" did the trick! Radio cloned! Thanks, Don!

Error explanation did it for tha final "click" into the radio!

COM5 responds but radio fails to respond

You don't want to click File -> New to start out because that opens a CSV format tab. A CSV format tab cannot be directly uploaded to "clone mode" radios. Your first steps should be 1. Download from

Got it! The search window bottom left>>type chirp>>click open new>>enter line by line SERA repeater list after figuring what each heading means.... Later...thanks! BT

It really isn't any different from any other Windows application. 1. Download CHIRP-next from the downloads page linked to here: https://chirp.danplanet.com/projects/chirp/wiki/Download 2. Download

Thank you, Jim. But first, how do I get the chirp to show on the screen once it is downloaded?

You simply download from your radio to create a tab that is compatible with your radio. Then you fill out/modify your channel data row-by-row. After CHIRP-next has been fully installed, I type "chirp"

Okay, I have become successfull in manually programming the UV-5R and have 6 channels in the radio. One is NOAA wx on 162.550 mhz and it works. Others are repeaters within 40 miles and one works

I had to increase it on mine when it wouldn't program. I had to do a little research to find out what to do. Donald KX8K ---------------------------------------------------- Some ham radio groups you