okay.. I have to admit being curious myself.??
I will send you:??
- the ENI board with the current parts on it (all new except the switch and Module A)
- please ignore the soldering boo boos... these phenolic single sided board cannot take many soldering hits, as you probably well know. My plan was to clean up and jumper the lifted pads once I confirmed functionality.? ??
- I have one transistor (V3) tacked to the bottom solder side I was going to put it in its proper place if confirmed good.??
- because whoever built these original boards loved to crimp leads, I snipped off most of the original parts.? The original transformers have little stubs of leads left on them.? Still probeable.??
- the original transformer, and one of the ones I got off eBay, and the one Lenox had provided me is soldered on the board now (note the transformer is not yet secured to the board).??
- and since the battery cage is hard wired to the board, i will send it along attached as well, without batteries.? Oh - one of the battery cage negative through hole rings lifted - I was going to fix that as part of final clean up.? ?
Michael C