PS the secondary winding should be around 3700 Ohms and no connection to ground when pin 1 is isolated or any other pins (when wires 1 and 2 are both isolated.? The secondary inductance will measure an incredible 80 HENRIES? (not milliHenries')
Pin 2 can be isolated by removing one lead of the HV diode its basic resiatance test super easy.
Geo
----- Original Message -----
From: Geo Dowell <GEOelectronics@...>
To:
[email protected]Sent: Fri, 29 Apr 2022 11:32:11 -0400 (EDT)
Subject: Re: [CDV700CLUB] Leni conversion #3
Correct on the pins Michael C.
Link
https://www.qsl.net/k0ff/LENi_Geiger_Counter/
When someone stumbles across the obove link, we need a better rendition of the schematics of both ENi and Lionel CDV-700's.
Geo
----- Original Message -----
From: Michael C <mtcooper01@...>
To:
[email protected]Sent: Thu, 28 Apr 2022 20:37:40 -0400 (EDT)
Subject: Re: [CDV700CLUB] Leni conversion #3
[Edited Message Follows]
will do and I will report back..
and to make sure I check the correct wire pairs:? ?according to schematic,? ?pins 1 and 2 together;? pins 3 and 4 together;? and pins 5 and? 6 together.? ?correct??
