good deal! All is well!
btw you might consider increasing that 1M
"dropper resistor" to 2M or 3M, I think regulation may improve
as it is increased.
rogerw
On 3/30/2022 10:45 PM, peter via
groups.io wrote:
Roger et al:
The weird voltage dropping trend as Vcc was raised well past the
shunting knee point was my fault.
Yesterday, while tinkering I accidentally connected the resistor
that is connected to the upper fet's gate and? to the dropper
resistor had its upper lead connected to Vcc.
See the dotted line on the attached jpg.
I must have accidentally connected the upper 66M resistor to the
wrong point while tinkering and didn't notice.
Sorry for the confusion. Circuit is operating as expected after
reconnecting the resistor to the lower side of the 1M dropper
resistor and seems to follow what Micro-Cap simulates.
P
--
rogerw
On the Catclaw
¦¬¦¯¦«¦¸¦ ¦«¦¡¦¢¦¥
The PanDemic is over, but the DemPanic goes on.
MisDisMal is a dictator's tool of repression.
