开云体育

I'm looking for manuals for a Bridgeport BTC-1. I think this is a Boss 9 control. I have a maintenance manual, but I'm looking for a programming manual and other docs that may be available. Any

Thanks for the heads up Jon. The guy that is selling this spindle has several things that the group might be interested in like stepper motors, ball screws, and a servo motor with an encoder.

under supported developed gantry table and design the well, choose belts to one end

Hi Joe, No driver to install, but I believe the address jumper on the board needs to be set. Alan KM6VV onecooltoolfool wrote:

Congrats! good luck! cul brian f.

I am trying to install a 2 axis dro from Dan Mauch. I keep getting the "board not found" msg although I believe the jumper and address settings to be correct. This is a compaq presario with only

echnidna@... writes: Bob: Yes. I have DONE this, and it takes AT LEAST "care". First, the rotor is a multi-poled magnet, and looks like two or four "thick pinion gears". It is alnico,

I have never used it but have seen it on ebay a few times. I don't think there are any cam functions in that software and it sounds like he doesn't even know what CAM software is. I'm not sure he even

Hi Mike, How about letting us know what you think of the program after you receive it and have a chance to try it out? There are so many CAD/CAM choices out there that deciding which one is more

I have seen quite a few gantry drives with one screw down the center under the table. This presents two problems. First, the table must be supported at the corners which limits stiffness. Second,

the holes triangular. an end Because the machine frames that we can afford to use at home are sometimes not real stiff and solid, it is possible to get a situation in which the tool and workpiece

You are only prompted once for each time you hit the generate code button. So if you have selected a bunch of points at once you will only get one prompt. Tim [Denver, CO]

Hi Tim, That's true, I might have to take a peek at EMC's config! However, I'm not sure I want to answer the Z, R, Q, P parms for EACH hole! I just copy and paste them in the editor. Alan

The company I work for has used resolvers for years. The resolver output isn't converted to digital, merely fed back to the servo preamplifier, integrated with a PWM drive signal and tach signal from

Hi, seems like a lot of sales lately on 1/2-10 acme rod. I just got 4 pcs. of 3 foot 1/2-10 acme rod for $28.00 on sale with 8 bucks for shipping. I usually buy from Dependable acme and these were of

Tim, I'm pretty familiar with reaming holes for proper fit, but the holes I'm talking about, are sometimes so misshapen, they almost look triangular. They're 1/4" holes, and I've even tried

Dan! wow, sounds like you took a GIANT step into the softwear world and won! I admire your work! cul brian f.

I too, was not all that impressed....well, other than the introductory pricing. On the cad side, I thought it rediculous that it would not allow a "nearest" snap and any other snap to be active at

Dumb Answer for drilling holes..... I couldn't help to think of a centerpunch I made for a 3 axis machine at a shop I worked at once. I took one of those spring/overcenter/snap type center punches and

Drill bits are well know for making off size and irregular holes. That is why you should use a reamer if the fit is important. Of course this is easier with CNC when you can get back to the same spot