Tim,
I'm pretty familiar with reaming holes for proper fit, but the holes
I'm talking about, are sometimes so misshapen, they almost look triangular.
They're 1/4" holes, and I've even tried cutting them through with an end
mill, and that wasn't great either.
Marv Frankel
Los Angeles
toggle quoted message
Show quoted text
----- Original Message -----
From: "Tim Goldstein" <timg@...>
To: <CAD_CAM_EDM_DRO@...>
Sent: Tuesday, October 22, 2002 2:36 PM
Subject: Re: [CAD_CAM_EDM_DRO] Dumb question on the drilling of holes
Drill bits are well know for making off size and irregular holes. That is
why you should use a reamer if the fit is important.
Of course this is easier with CNC when you can get back to the same spot
so
you don't have to keep switching tools.
Tim
[Denver CO]
----- Original Message -----
Guys,
I'm following this subject with great interest. One of the
reasons
I
subscribe to this group, is to learn enough to convert my mill to CNC. I
have been fabricating some parts on a mill, using the DRO, and have run
into
problems drilling holes. Using certain drill bits, many of the holes
have
come out oversize, and some completely out-of-round. Changing bits has
helped, especially if I use a shorter length bit, but I'm going to
investigate using the 135 degree, or other similar drills. I'm looking
forward to a CNC conversion, when I intend to center drill the holes
before
using the correct drill bit.
Marv Frankel
Los Angeles
Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...
Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to
