I can remember. Take a look at you doc that you got with your oem650 and
checking the pulse width for a step. Then call AH-HA and they will tell you
what the set up menu function is for that. It's been 5 years since I ran
into that problem.
Dan
toggle quoted message
Show quoted text
-----Original Message-----
From: Jon Anderson <janders@...>
To: CAD_CAM_EDM_DRO@... <CAD_CAM_EDM_DRO@...>
Date: Wednesday, June 16, 1999 6:46 AM
Subject: Re: [CAD_CAM_EDM_DRO] MaxNC modifications
From: Jon Anderson <janders@...>
Dan Mauch wrote:
On the Ah-Ha software there can be a problem. I had one customer that had
my
2 amp drivers and ran into a problem with lost steps. We finally figured
out
that there is a timimng set up in the ah-ha set menu. We increased the
time
and the prblem went away.
Dan,
If you ever happen to remember what parameter it was you changed, could
you let me know? I'd be eternally grateful.
While I feel it's software, there are too many people using Ah-ha
commercially for this to not have a fix. It's just finding that fix....
Thanks,
Jon
------------------------------------------------------------------------
Looking to expand your world?
ONElist has 170,000 e-mail communities from which to choose!
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe:
bill, List Manager
