I See from the web site that the registration tab can include MACH2. So why
would someone need sheetcam if they have MACH2/3?
John Dammeyer
toggle quoted message
Show quoted text
Subject: Re: [CAD_CAM_EDM_DRO] Re: water jet cam
SheetCam <www.sheetcam.com> can do this at a much lower price. I can
write a post processor for you that will slow down to a preset
percentage of the normal feed rate on arcs. The post could even be
configured to slow down more for tighter arcs.
Les
afogassa wrote:
Hi Peter,
I do have deskcnc and it's good enough for this, but water jets
needs a good cam that can look way ahead and predicts what
is going
to happen and than starts to adjust the feed rate before
it gets to
a corner or radius to compensate for Jet lag doing that manualy
would be a pain if not impossible.
Got a quote from PEPs and it runs at 10K US$ (ouch !!)
I've being thinking about getting a working G code, than work this
out on excel to adjust the feed rate.
Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...
Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@...,
wanliker@..., timg@...
Moderator: pentam@... indigo_red@...
davemucha@... [Moderators]
URL to this group:
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com
to reach it if you have trouble.
I consider
this to be a sister site to the CCED group, as many of the
same members are there, for OT subjects, that are not allowed
on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
