|
"Ian W. Wright" <[email protected]
Hello group,
With a bit of luck, this list will be the best thing in my life (sad eh?) As some of you know already I repair and restore high class watches and small clocks and I am wanting to find a way of making small parts easily and accurately. A typical problem might be that a complicated chronograph may come in, having suffered the attentions of an 'expert', with one or more of its internal operating levers missing. At the moment the only way I can reliably make a new part is to cut and fit it gradually bit-by-bit using the remains of the movement as a guide - a very hit-and-miss affair. I have worked out that, by taking digital photos, importing them into Autocad and drawing over them, I can design the required new part to a high degree of accuracy and confirm that it will work OK before I cut any metal BUT I then have the major problem of transferring the designed shape onto the metal and cutting it accurately - a scribed line in my scale of things can be half the width of the finished part! So, I have been playing about for some time with ideas to make a wire EDM and a miniature CNC miller - each with a table size of only about 6" x 6". However, I have continually fallen at the first fence as I don't seem to be able to get a stepper interface working properly. The steppers I have are marked 'Step-Syn' type 103G770-0344, 24 volt, 0.22 Amp, 1.8 deg/step, 5 wire. I have tried a number of published stepper driver circuits but these are mainly for low voltage motors and seem to give up when I try to hang a power darlington output stage on them to handle the higher voltage. I must admit to not having tried Dan's circuit yet but, after so much wasted time and expense, I'm a little sceptical of paying out for 24 transistors on a maybe! (Sorry but I am the archetypal Yorkshireman - deep pockets and short arms!) I tried running an emulation of this circuit on an electronics workbench program and it seemed to work, although with apparently jittery outputs - then I moved and reconnected a wire I had connected to the wrong place and it stopped working! Can anyone advise me on the practical solutions they have found and, also, can anyone tell me how the feedback circuits of a wire EDM work - I'm sure this is really the machine I need for most of the work I want to do. Some of the watches etc. I have been working on recently are on my web site at Best wishes Ian -- Ian W. Wright LBHI Sheffield Branch Chairman of the British Horological Institute. Bandmaster and Euphonium player of the Hathersage Brass Band. UK. See our homepage at:- or or 'Music is the filling of regular time intervals with harmonious oscillations.' |
