On Friday 12 December 2003 8:11 pm, CAD_CAM_EDM_DRO@... wrote:
Message: 16
Date: Fri, 12 Dec 2003 21:59:58 -0000
From: "V Terry Taylor" <mambavtt@...>
Subject: emc.ini HELP!!!
could someone help me out with what I need to put in the emc.ini file
for my new sherline 2000 mill (Inch ver) when I got my cd it was bad
so I had to burn a new copy off of the linux supplyers website... But
It is far from configured for my mill... if someone else in this group
has the same mill I would greatly aprecate a coppy of that file...
thanks'
The stuff is in the tarball that is shipped on the second CD. It's named
sherline-mods.tar.gz. Drag that into the / directory and issue the
command "tar xzvf sherline-mods.tar.gz". When you restart the X-Windows
system with logout or <control><alt><backspace> you'll see the super
sherline icon on the desktop.
I've seen mismatch between the stuff on the main CD and those on the
second in a few cases. If that icon does not start up correctly, you will
need to browse into the first cd and find a file named
file:/mnt/cdrom2/RedHat/RPMS/emc-rtl??
click it and when the installer comes up make sure that you select the
replace files option. That should be all that you need to do. Post a
note off list if you need more.
Ray
