Hey Tim. I am going to be retro'n my bench top unit. As you can tell by my
misinformed posts, I'm still learning my way around. I have no preference
for windows based or DOS, I've used both over the years and wouldn't know
which is best [if there is even a difference.]
Though I have a ton of questions I've been unable to locate answers for with
my web searches.
thanks for your help I'll check out the two you recomend.
Owen
toggle quoted message
Show quoted text
----- Original Message -----
Depends what you mean by "like Flashcut". If you mean a windows based
controller than look at Mach1 or DeskWinNC. If you mean a turn key
system than we need to know what type/size machine to give you some
ideas. If it is for a Sherline sized machine than take a look at the
package that Dan at Camtronics is offering. $500 for a turn key 2.5 amp
3 axis controller. Add $300 for 3 motors and $100 for a Mach1/Master5
license and you have a complete system for $900 that will run with the
best of them.
Tim
[Denver, CO]
