About 50 volts. That would likely triple your feed rates. The max RPM
you can get is also dependent upon inductance of your motors. You do not
mention how yours are wired or what voltage they are.
This is not to say you need to have your Sherline go that fast, only how
you would if you had to.
Tim
[Denver, CO]
toggle quoted message
Show quoted text
-----Original Message-----
I'm feeding both drivers with 24 volts.
What am I missing?
--
Bryan Mumford
Santa Barbara, California
Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com
to reach it if you have trouble.
I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner
