You can not change the pinout without modifying the source code and
recompiling. Not for the Linux beginner. The backlash works as well as
backlash can. No EMC does not read a tach (just wonder what the tach is
hooked to?). It will give you cutter comp and with the constant
contouring it can run surfacing programs and such much faster. You may
want to take a look at Mach1. It is based on the EMC interpreter and has
most/all/more features and you can easily change the pin-outs. Look at
www.ArtofCNC.ca
Tim
[Denver, CO]
Sherline products at Deep Discount
www.KTMarketing.com/Sherline
toggle quoted message
Show quoted text
-----Original Message-----
can you change the pinout the board i use has diffrent pinouts (step
and direction for x y z axis)also does the backlash comp work good
and also does it read a tach i use turbocnc now but as a machinist
at work i use cutter comp and turbocnc does not have it and at home i
woyld like it on my sherline mill thanks
Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com
to reach it if you have trouble.
I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner
