Hello Mike I have two full size EDM's Japax, plus mills. But when it
comes to taking out exhaust manifold studs that are really rusted in there.
I have found a rust disolving solution that is fantastic. All you do is heat
it up a little, I used an old kettle, you don't have to boil the water based
rust remover, just warm or hot. This speeds up the process, and within
24hrs. the studs can be removed with just your fingers. The rust remover
only disoles the rust and goes right between the threads. I used to spend
hours just setting up the manifolds to remove the studs, not any more.
Franco Candido
candidomold@...
From: mueller914 <mmueller@...>
To: <CAD_CAM_EDM_DRO@...>
Sent: Thursday, October 24, 2002 12:50 PM
Subject: [CAD_CAM_EDM_DRO] "Light Bulb" EDM ???
In the latest issue of one of the home shop Machine mags, they had a
feature with a home built EDM which for some reason used light bulbs
(controlling the freq. I guess)
anyone have more detailed plans for the electrical side of this
project or point me in the right direction?
I have a few broken exhaust studs that I'd like to remove myself
Thanks,
Mike
Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...
Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to
