--- In CAD_CAM_EDM_DRO@y..., Phil Whittingham <philw3@c...> wrote:
Two ways to remove keys Phil. One is to tap on the end with a sharp
chisel to force the key up and the other is to drill and tap it and
insert a jack screw to extract it.
Not knowing what type of mill you have you can have a look in the
photos section on the web site at some files near the end marked Taig
xx.
This is the design I chose to use to reduce overhang and cheap off
the shelf drive components.
John S.
I'm starting to look at designing motor brackets for my mill
conversion
but have an issue.
I'm trying to remove the key from the x and y screws but having no
luck.
Is there a trick to this ? I've tried tapping it with a hammer but
no
luck.
It looks as though I need to remove this key before I can slide the
dials and end caps off the shafts.
Has anyone got pictures/designs for motor brackets when using timing
belts and pulleys ?
thanks
Phil
