Scot,
The voltage ratings of Caps in series is the sum of
their individual ratings, and in parallel it's the same
as the lowest rating of the individual caps.
Bill Higdon
toggle quoted message
Show quoted text
On Friday 18 October 2002 09:45 pm, you wrote:
But doesn't the voltage rating drop to half when you run caps in series and
double when you run them in paralell?
Scot
SO, say two 33k resistors in series would equal to 66k resistance?
And two 1000uF capacitors in parallel would equal 2000uF
capacitance??
Regards,
Jim
--- In CAD_CAM_EDM_DRO@y..., "Lloyd Leung" <lloyd@l...> wrote:
So:
- Resistors are in series [to gain resistance]
- Capacitors are in parallel [to gain uF]
I really should remember that, but I've only use it maybe once in
23
years [once in my life thus far]
-----Original Message-----
From: wanliker@a... [mailto:wanliker@a...]
Sent: October 18, 2002 11:16 PM
To: CAD_CAM_EDM_DRO@y...
Subject: Re: [CAD_CAM_EDM_DRO] Capacitors, no CAD, EDM, DRO
content but
maybe CNC
In a message dated 10/18/2002 5:15:26 PM Mountain Daylight Time,
lloyd@l... writes:
Btw, I forget if that was in series or parallel, it's been a few
months
Always in parallel to add values..............Often, makes a nicer
package
depending on the dimensions......
bill
Addresses:
FAQ:
FILES:
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@...
Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to
Addresses:
FAQ:
FILES:
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you
have trouble.
I consider this as a sister site
to the CCED group, as many of the same members are there, for OT subjects, that
are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T
POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@...
Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to
