It requires just a few parts . See Tom Kulaga's discussion earlier today
about other parts required.
Dan
toggle quoted message
Show quoted text
-----Original Message-----
From: Mark Fraser <mfraser@...>
To: CAD_CAM_EDM_DRO@... <CAD_CAM_EDM_DRO@...>
Date: Saturday, May 29, 1999 6:41 PM
Subject: Re: [CAD_CAM_EDM_DRO] DRO boards
From: Mark Fraser <mfraser@...>
So, I missed the earlier discussion on this item - what else will I need to
a) populate the board, and
b) drive it?
(a pointer is fine, thanks) / mark
Dan Mauch wrote:
From: "Dan Mauch" <dmauch@...>
I use the US Digital linear encoder strips mounted in a 1X2 rectangular
tube
the length of the strip. I use a tube as a pushrod and as the conduit for
the encoder cables. Works slick.
I will be ordering board tomorro. Better let me know if you want a board.
Dan
-----Original Message-----
From: Buchanan, James (Jim) <jambuch@...>
To: CAD_CAM_EDM_DRO@... <CAD_CAM_EDM_DRO@...>
Date: Wednesday, May 26, 1999 6:08 PM
Subject: Re: [CAD_CAM_EDM_DRO] DRO boards
From: "Buchanan, James (Jim)" <jambuch@...>
Tom:
I am just new to the list so I missed out on some earlier discussion of
your DRO project. I scanned your WEB page, I think it was yours, But I
seemed to have missed what type of encoders you are using and or
support. How about building your own using a type setter to make a film
grid.
Thanks
--
James Buchanan
Lexington, Kentucky (The Blue Grass State) USA
Two Truck Climax Locomotive Operator & Builder
------------------------------------------------------------------------
ONElist: where real people with real interests get connected.
Join a new list today!
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
------------------------------------------------------------------------
ONElist: where the world talks!
Join a new list today.
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
------------------------------------------------------------------------
It's finally here! What's your opinion?
Create a Star Wars discussion group at ONElist.
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
