开云体育

----- Original Message -----
From: Tim Goldstein <timg@...>
To: <CAD_CAM_EDM_DRO@...>
Sent: Friday, June 18, 1999 9:32 PM
Subject: Re: [CAD_CAM_EDM_DRO] Linux 6.0 - 5.2

From: "Tim Goldstein" <timg@...>

Not sure about the ability to down grade RedHat from 6.0 to 5.2

The 2 versions use vastly different kernels, but it is worth a try if you
want to run EMC. If it works you are ready to go, if it fails you just
reinstall everything with 5.2 and are only out the few minutes it takes to
copy the kernel and edit LILO.

EMC does run step and direction signals out the parallel port in addition

to

running servos from an addin card. I am currently running a Camtronics 5

amp

stepper controller using EMC.

Tim what exactly are you using the Camtronics stepper controller and EMC
on??? I'm sure you had mentioned it in the past....... Also, whose motors
are you using? oz-in.?? So your just coming off the parallel port? What
addin card for the servo's?
Thanx.

Tim
[Denver, CO]

-----Original Message-----
From: William Scalione [mailto:scalione@...]
Sent: Friday, June 18, 1999 5:25 PM
To: CAD_CAM_EDM_DRO@...
Subject: [CAD_CAM_EDM_DRO] Linux 6.0 - 5.2


From: William Scalione <scalione@...>

I already have Linux 6.0 on a computer here and was wondering if it is
possible to downgrade (is that the proper term?) to linux 5.2 without
having to reload. Can I just copy over the kernal with the proper
version or am I asking for trouble?

Also EMC will work with a step and direction controller won't it?

Bill

------------------------------------------------------------------------
What do lizards and rock music have in common?

They both have communities at ONElist. Find yours today!
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for
the discussion of shop built systems in the above catagories.
To Unsubscribe:

bill, List Manager

------------------------------------------------------------------------
How many communities do you think join ONElist each week?

More than 5,000! Create yours now!
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.

To Unsubscribe:

bill, List Manager