开云体育

a I have used the C14-G11 combo for a couple of years. The G11 with the C14 is very good visually, and very portable, but is difficult for CCD work. I have had some good resuts with it in Fastar

a I have used the C14-G11 combo for a couple of years. The G11 with the C14 is very good visually, and very portable, but is difficult for CCD work. I have had some good resuts with it in Fastar

I would like to solicit comments from those who have used a C14 on a G11 for imaging. Could you tell me your experiences? Is this configuration stable in modest winds, etc.? Thanks, Chip

I checked the archieves here and at SBIG on this but didn't find anything. Is anyone using this SBIG software? I tried it sucessfully with a 24 hole mask on a C14 for the first time this weekend.

Michael, I believe the Celestron representative in Portugal has 2 C-14 Fastar Lens Assys available. Ask him directly: ruialvaro@... Good luck

Thank you for the info

Hi Michael, I have a Fastar adapter for my C-14... got it a few nonths ago. Just check around.... I have good luck with Astronomics and Anacortes. Bruce Ellis is quarter Nov.

Hi all, I am a new owner of a CM-1400 and I want to know if the fastar Lens is available? I have a GPS11 and the lens for that is not available till 1st quarter 2002. The Dealer were I bought it

Hi Scott, Thank you for this information. This was something I was not aware of. Many years ago (1985) I bought, and owned a Super C-8 Plus, and it was a Black tube, with Black Forks/Drive Base.

A friend of mine just recently took delivery of his C9.25 and it is the same light grey as the new C-14s. I haven't seen a C8 in that color but was told that Celestron is moving to it for all of

Mark, handles >would become loose in the future. No doubt a removal of the primary mirror >would be in order to either tighten them, or eliminate them altogether. That is correct, I just hope these

Hi Geert, As far as a know, no, the C-14 OTA is still aluminum at present. I have heard some rumor about a possible Carbon-Fiber C-14, and many have already said this would be a mistake. I don't

Hi, Within the last 2 weeks, I have corresponded with a couple of owners of the new C-14, and am a bit dismayed about a couple of items they have changed. One is the Tube Color Grey? Why the hell

Hi, I've seen a grey carbon fibre tube of a C-11 and I didn't really like the colour, but then it doesn't matter much. Is the new C-14 grey tube in carbon fibre as well??? As for the handles, I've

HI, CHAD I'M IN WILMINGTON, DELAWARE JOHN

Where are you located? Chad

Hi, Can anyone tell me how the secondary is mounted in the C-14, more precisely is the secondary held firm by the middle screw, while the three collimation screws are just pushing against the

I HAVE A C14 THAT I WOULD LIKE TO SELL. IT HAS BEEN USED LITTLE. IT IS AN ORANGE TUBE C14 WITH SPECIAL COATINGS AND INCLUDES A TRIPOD WITH WEDGE AND THE C14 DIAGONAL. I PURCHASED IT ABOUT 20 YEARS

Is there anyone who is looking to sell their C-14? CD

Hi Mark, The mount was made in Germany by Mr Eckhard Alt. He made three types : the Alt 5, 6 and 7. Earlier types had a tangent arm declination adjustment, the later types called Alt AD5/6/7 have