|
Please put me down for 2 click boards too. I have already signed up for 2 AGC boards.
73
Alan N4AYE
|
Hi Kees
If you're maintaining a list of people wanting kits, then I'll have 4 of each please.
73
Ken VA3ABN
On Mon, Apr 30, 2018 at 9:53 PM, Kees T <windy10605@...> wrote: Ken,
As many as required.
We need to build and test a few when the boards arrive (plenty of volunteers) and then we'll let er' rip. Status will be posted here.
Assuming I can get 100% yield on the shear that's 160 AGC and 320 Click boards initially, more as needed after that. With the DHL shipping I'll have to figure out what the board cost is to me and go from there. You will be surprised, it will be quite low. What drives overall kit prices up is US/DX postage, PayPal fees, and packaging. Quantity is what makes it cheap.
73 Kees K5BCQ?
|
I'm on the late bus.? If this is the place to get on the list,?I would like two AGC boards, please.
Thanks es 73,
Pat AA4PG
Pat Griffin
http://www.cahabatechnology.com
toggle quoted message
Show quoted text
Please put me down for 2 click boards too. I have already signed up for 2 AGC boards.
73
Alan N4AYE
|
Please put me down for 1 click board and 1 AGC boards. 73, OZ8PZ, Stig
Please put me down for 2 click boards too. I have already signed up for 2 AGC boards.
73
Alan N4AYE
|
I would also mlike two of each board.
??? 73
????? Bob? KD8CGH
|
Hallo Kees,
I would like to order both boards/kits, AGC and pop fix. Thanks a lot!
73, Frank
PA7F
|
One of each for me even though I have done little SMD work - could be interesting!
73, Bill NZ0T
|
Likewise, one of each board for me.? Thanks again for doing this!
-KI4QGJ
|
And one of each for me.? This is great. Many thanks!
Neil? ?--W2NDG
|
As they said in JAWS, "I think we need a bigger boat".
Gary, KJ5VW, has volunteered to pull together a spreadsheet with all the requests to date and those that were sent to me directly. That way we'll have a better idea of what we're looking at and I can focus on the Gerbers, parts, testing, and figuring out the least expensive way to distribute these "Mini Kits". Don't worry about "being late", this will continue for some time.
Right now I'm looking at;
1) Up to 3 (maybe 2, maybe more) kits and the associated schematic(s) in one regular envelope with a $0.71 "Non Machinable Surcharge" stamp. This works for the USA.
2) The parts (including headers and double sided tape) will be attached to the appropriate schematic with a strip of tape. Highly recommended that you remove the parts over something flat and not the shag carpet. Please refer to Don's, ND6T, website for detailed instructions on wiring it up to the uBITX and how to connect up the RF Gain potentiometer if you are wanting to use one.??
3) Payment to me by check to my address (good in QRZ and ARRL website) or if you choose PayPal, a PayPal surcharge adder to cover whatever they charge.
4) Larger orders broken up into multiple mailings.
5) DX postage and PayPal fees as appropriate.??
My objective is only to have fun with electronics, promote some great designs, and not to loose money.
73 Kees K5BCQ
??
|
Same for me.? One of each.
Bill
On 5/1/2018 10:46 AM, Paula
Bailey-Stine wrote:
toggle quoted message
Show quoted text
Likewise, one of
each board for me.? Thanks again for doing this!
-KI4QGJ
|
|
|
Hello
If someone in EU\Scandinavia needs PCB contact ?me, as I also ?have on hand some here. Best Regards, LB3RE K3RAG? Skype: lb3re.rag 2. mai 2018 kl.?01:38 skrev Bill Robbins < wa8cdu@...>:
toggle quoted message
Show quoted text
Same for me.? One of each.
Bill
On 5/1/2018 10:46 AM, Paula
Bailey-Stine wrote:
Likewise, one of
each board for me.? Thanks again for doing this!
-KI4QGJ
|
Please put me down for 2 each.? Appreciate all the hard work and willingness to share with us all.
Thanks,
Gene N2IJF
toggle quoted message
Show quoted text
Ken,
As many as required.
We need to build and test a few when the boards arrive (plenty of volunteers) and then we'll let er' rip. Status will be posted here.
Assuming I can get 100% yield on the shear that's 160 AGC and 320 Click boards initially, more as needed after that. With the DHL shipping I'll have to figure out what the board cost is to me and go from there. You will be surprised, it will be quite low. What
drives overall kit prices up is US/DX postage, PayPal fees, and packaging. Quantity is what makes it cheap.
73 Kees K5BCQ?
|
Please put me down for two of each.
Thanks,?
Loren KA5U
|
I will certainly purchase a ready made PCB for this design.? I did ND6T's small PCB as he described, and wasn't happy with the result.? My work not his.? I did purchase a small lot of 2N7002 SMDs; more than I can ever use, so I would be willing to make this my contribution for getting this PCB produced.
De Gary AA7GW "73"
|
Please add my name to that list.
John Greusel
KC9OJV
|
Kees, I would like to order one each of the AGC kit and the Pop filter
kit. I was waiting to see if you will have a "formal" url/store at
which to order the kits. As you direct, will send my info and use
Paypal (and pay the fees of course) -- what are the prices again?. --
Rich Spohn WB2GXM
toggle quoted message
Show quoted text
On 5/1/18, Kees T <windy10605@...> wrote: As they said in JAWS, "I think we need a bigger boat".
Gary, KJ5VW, has volunteered to pull together a spreadsheet with all the
requests to date and those that were sent to me directly. That way we'll
have a better idea of what we're looking at and I can focus on the Gerbers,
parts, testing, and figuring out the least expensive way to distribute these
"Mini Kits". Don't worry about "being late", this will continue for some
time.
Right now I'm looking at;
1) Up to 3 (maybe 2, maybe more) kits and the associated schematic(s) in one
regular envelope with a $0.71 "Non Machinable Surcharge" stamp. This works
for the USA.
2) The parts (including headers and double sided tape) will be attached to
the appropriate schematic with a strip of tape. Highly recommended that you
remove the parts over something flat and not the shag carpet. Please refer
to Don's, ND6T, website for detailed instructions on wiring it up to the
uBITX and how to connect up the RF Gain potentiometer if you are wanting to
use one.
3) Payment to me by check to my address (good in QRZ and ARRL website) or if
you choose PayPal, a PayPal surcharge adder to cover whatever they charge.
4) Larger orders broken up into multiple mailings.
5) DX postage and PayPal fees as appropriate.
My objective is only to have fun with electronics, promote some great
designs, and not to loose money.
73 Kees K5BCQ
|
Forgot to say, I would like the thru-hole kits, not the SMT kits -
Rich Spohn WB2GXM
toggle quoted message
Show quoted text
On 5/1/18, Richard Spohn <wb2gxm@...> wrote: Kees, I would like to order one each of the AGC kit and the Pop filter
kit. I was waiting to see if you will have a "formal" url/store at
which to order the kits. As you direct, will send my info and use
Paypal (and pay the fees of course) -- what are the prices again?. --
Rich Spohn WB2GXM
On 5/1/18, Kees T <windy10605@...> wrote:
As they said in JAWS, "I think we need a bigger boat".
Gary, KJ5VW, has volunteered to pull together a spreadsheet with all the
requests to date and those that were sent to me directly. That way we'll
have a better idea of what we're looking at and I can focus on the
Gerbers,
parts, testing, and figuring out the least expensive way to distribute
these
"Mini Kits". Don't worry about "being late", this will continue for some
time.
Right now I'm looking at;
1) Up to 3 (maybe 2, maybe more) kits and the associated schematic(s) in
one
regular envelope with a $0.71 "Non Machinable Surcharge" stamp. This
works
for the USA.
2) The parts (including headers and double sided tape) will be attached
to
the appropriate schematic with a strip of tape. Highly recommended that
you
remove the parts over something flat and not the shag carpet. Please
refer
to Don's, ND6T, website for detailed instructions on wiring it up to the
uBITX and how to connect up the RF Gain potentiometer if you are wanting
to
use one.
3) Payment to me by check to my address (good in QRZ and ARRL website) or
if
you choose PayPal, a PayPal surcharge adder to cover whatever they
charge.
4) Larger orders broken up into multiple mailings.
5) DX postage and PayPal fees as appropriate.
My objective is only to have fun with electronics, promote some great
designs, and not to loose money.
73 Kees K5BCQ
|
Hi, Please add me to the list 1 of each boards (smt)
Thanks...
Zbigniew L
|
Bob Benedict, KD8CGH
Frank PA7F
Neil Goldstein
Gerry Hull
LB3RE/LC0X "Rag" Stein-Roar
AA7GW Gary