Bitx board

thomas.adair All Messages By This Member #81095 I have this board and 4 pin mic, ptt setup. Can I use this with the uBitx v-6 4 pin panel mount.jpg
Evan Hand All Messages By This Member #81097 Since the AUDIO connector is still the same and not used, I believe that you can. You would have to modify the DIGITAL connector to tap off the PTT signal, or to move the encoder connection to go through this board.? I would just make an adapter from the 4 pin mic connector to a 3.5mm plug. ?This is what I did for my original builds.? 73 Evan AC9TU
thomas.adair All Messages By This Member #81100 开云体育 Thank you, I'll give it a try. Sent via the Samsung Galaxy A10e, an AT&T 4G LTE smartphone toggle quoted message Show quoted text -------- Original message -------- From: Evan Hand <elhandjr@...> Date: 8/7/20 2:55 PM (GMT-06:00) To: [email protected] Subject: Re: [BITX20] Bitx board Since the AUDIO connector is still the same and not used, I believe that you can. You would have to modify the DIGITAL connector to tap off the PTT signal, or to move the encoder connection to go through this board.? I would just make an adapter from the 4 pin mic connector to a 3.5mm plug. ?This is what I did for my original builds.? 73 Evan AC9TU

开云体育