¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

shop.kit-projects AGC board. Seeking install instructions

 

Hello. My apologies if this is a dupe post. I tried various combinations of search terms and found nothing. Perhaps I just have lousy search skillz.

Ready to take the leap, I jumped over to shop.kit-projects.com to snag one of these agc boards for my V6 uBitx. They were out of stock.?

I found an ebay seller with a complete unopened? board, switch, and resistor at a great price. He assured me the instructions can be found here or on shop.kit-projects.com. I couldn't find them here (as I've mentioned) and I think their website makes such things available to those who purchase directly from them.

So, I'd be mighty beholden if someone with the instructions could either post them here (if that's not a violation) or email them to me at ag7gm dot dan at gmail.com.

Please and thank you.
Dan
AG7GM
--
Dan D'Eon
AG7GM
 

I did a?
search for "ubitx agc board" and got a bunch of hits.


?



On Monday, June 29, 2020, 7:20:34 PM EDT, Dan D'Eon <pulco.ant@...> wrote:


Hello. My apologies if this is a dupe post. I tried various combinations of search terms and found nothing. Perhaps I just have lousy search skillz.

Ready to take the leap, I jumped over to shop.kit-projects.com to snag one of these agc boards for my V6 uBitx. They were out of stock.?

I found an ebay seller with a complete unopened? board, switch, and resistor at a great price. He assured me the instructions can be found here or on shop.kit-projects.com. I couldn't find them here (as I've mentioned) and I think their website makes such things available to those who purchase directly from them.

So, I'd be mighty beholden if someone with the instructions could either post them here (if that's not a violation) or email them to me at ag7gm dot dan at gmail.com.

Please and thank you.
Dan
AG7GM
--
Dan D'Eon
AG7GM

 

Dan,

?Check your junk mail I sent you all the info when you requested it.

?73

--
David

?N8DAH
 

Thanks, David. The Google works so well for me that it didn't occur to me that it tossed it in the spam folder. I found 3 messages!?

I'll need to get in the habit of checking there first before I start whining. :)
--
Dan D'Eon
AG7GM
 

No worries just happy it made it.

73
--
David

?N8DAH
 

Many thanks, David. It's all working. I *do* notice a drop in overall volume.

Just an FYI for your documentation: You indicate that the S-meter connection on a TSW Teensy can go to pin A19. There is no "pin A19." There is a pin 19 which is A5. Using A5 doesn't work. The TSW documentation says it should go to A7. It also says it's pre-calibrated for the N8DAH board, and I have to assume that board is the same as yours, and if it's not I've connected to A7 anyhow - mostly because I don't have a 50 microvolt signal for calibration.

All good here. Again, thanks.

73
Dan?
AG7GM


--
Dan D'Eon
AG7GM
 

Good catch Dan!

Fixed the pdf thank you.

?73
--
David

?N8DAH

1 - 7 of 7