|
Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI
toggle quoted message
Show quoted text
On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
Hi Art! What type of jack do you have on your headset? 3 contacts or 4 contacts?
Can you get a diagram of your headset connections to the jack? Once I know what you have I might be able to help
--
Ion VA3NOI
|
Joel
No ptt. I installed a separate button for ptt. Connector on end of cable is a stereo 3.5 mm. Built-in mic is electret on a small boom extending from the headset. I have a second?
Bitx that I modified the fist set for mic and ptt and that works great. Separate speaker though. Any help appreciated?
73 Art
Sent from my iPhone
toggle quoted message
Show quoted text
On Feb 2, 2017, at 6:14 PM, Joel Caulkins < caulktel@...> wrote: Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
3 contacts
Sent from my iPhone
toggle quoted message
Show quoted text
On Feb 2, 2017, at 6:48 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Joel
No ptt. I installed a separate button for ptt. Connector on end of cable is a stereo 3.5 mm. Built-in mic is electret on a small boom extending from the headset. I have a second?
Bitx that I modified the fist set for mic and ptt and that works great. Separate speaker though. Any help appreciated?
73 Art
Sent from my iPhone
On Feb 2, 2017, at 6:14 PM, Joel Caulkins < caulktel@...> wrote: Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
WHile we are on the subject, could someone please give me a pinout for the 3.5mm jacks that came with my kit? There are 5 pins, and none are numbered as to what they are...
Rich KC8MWG
On Thursday, February 2, 2017 6:57 PM, Art Olson via Groups.Io <olsonaj6927@...> wrote:
3 contacts
Sent from my iPhone On Feb 2, 2017, at 6:48 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote:
Joel
No ptt. I installed a separate button for ptt. Connector on end of cable is a stereo 3.5 mm. Built-in mic is electret on a small boom extending from the headset. I have a second?
Bitx that I modified the fist set for mic and ptt and that works great. Separate speaker though. Any help appreciated?
73 Art
Sent from my iPhone
On Feb 2, 2017, at 6:14 PM, Joel Caulkins < caulktel@...> wrote:
Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
I did a google and found a pin out that matched the pin lay out
Pin 1 - common
Pin 2 ?left audio to radio side
Pin 3 left audio to receiver?
Pin 4 right audio to receiver
Pin 5 audio to radio side
All that said - not sure if that maps to the jack in the kit
Best I could find so far
Sent from my iPhone
toggle quoted message
Show quoted text
On Feb 2, 2017, at 7:08 PM, Richard Andrew Knack via Groups.Io < ihc73scout2@...> wrote: WHile we are on the subject, could someone please give me a pinout for the 3.5mm jacks that came with my kit? There are 5 pins, and none are numbered as to what they are...
Rich KC8MWG
On Thursday, February 2, 2017 6:57 PM, Art Olson via Groups.Io <olsonaj6927@...> wrote:
3 contacts
Sent from my iPhone On Feb 2, 2017, at 6:48 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote:
Joel
No ptt. I installed a separate button for ptt. Connector on end of cable is a stereo 3.5 mm. Built-in mic is electret on a small boom extending from the headset. I have a second?
Bitx that I modified the fist set for mic and ptt and that works great. Separate speaker though. Any help appreciated?
73 Art
Sent from my iPhone
On Feb 2, 2017, at 6:14 PM, Joel Caulkins < caulktel@...> wrote:
Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
Rich,
What I have to do every time Is to take a stereo plug that has not been used yet and plug it into the jack, then check each pin for continuity between the two and which pin of the jack goes to the tip, sleeve, and ring of the plug. The leftover two pins are not used and are closed circuits pins, (like when you want the audio to come out a internal speaker until you plug in the plug). Joel? KB6QVI
toggle quoted message
Show quoted text
On Feb 2, 2017, at 4:08 PM, Richard Andrew Knack via Groups.Io < ihc73scout2@...> wrote: WHile we are on the subject, could someone please give me a pinout for the 3.5mm jacks that came with my kit? There are 5 pins, and none are numbered as to what they are...
Rich KC8MWG
On Thursday, February 2, 2017 6:57 PM, Art Olson via Groups.Io <olsonaj6927@...> wrote:
3 contacts
Sent from my iPhone On Feb 2, 2017, at 6:48 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote:
Joel
No ptt. I installed a separate button for ptt. Connector on end of cable is a stereo 3.5 mm. Built-in mic is electret on a small boom extending from the headset. I have a second?
Bitx that I modified the fist set for mic and ptt and that works great. Separate speaker though. Any help appreciated?
73 Art
Sent from my iPhone
On Feb 2, 2017, at 6:14 PM, Joel Caulkins < caulktel@...> wrote:
Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
Art,
Usually the tip of the plug is the headphones, the sleeve, (the middle ring), is the mic, and the ring or the body of the plug is ground that is common to both, but I don't know how yours is wired. ?If it doesn't work one way, switch the the tip and sleeve wires, the ground remains where it is. It's easy to do but hard to explain. Joel? KB6QVI
toggle quoted message
Show quoted text
On Feb 2, 2017, at 3:48 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Joel
No ptt. I installed a separate button for ptt. Connector on end of cable is a stereo 3.5 mm. Built-in mic is electret on a small boom extending from the headset. I have a second?
Bitx that I modified the fist set for mic and ptt and that works great. Separate speaker though. Any help appreciated?
73 Art
Sent from my iPhone
On Feb 2, 2017, at 6:14 PM, Joel Caulkins < caulktel@...> wrote: Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
Joel
Ok. I will give it a try and report back
Thanks
Art
Sent from my iPhone
toggle quoted message
Show quoted text
On Feb 2, 2017, at 7:33 PM, Joel Caulkins < caulktel@...> wrote: Art,
Usually the tip of the plug is the headphones, the sleeve, (the middle ring), is the mic, and the ring or the body of the plug is ground that is common to both, but I don't know how yours is wired. ?If it doesn't work one way, switch the the tip and sleeve wires, the ground remains where it is. It's easy to do but hard to explain. Joel? KB6QVI On Feb 2, 2017, at 3:48 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Joel
No ptt. I installed a separate button for ptt. Connector on end of cable is a stereo 3.5 mm. Built-in mic is electret on a small boom extending from the headset. I have a second?
Bitx that I modified the fist set for mic and ptt and that works great. Separate speaker though. Any help appreciated?
73 Art
Sent from my iPhone
On Feb 2, 2017, at 6:14 PM, Joel Caulkins < caulktel@...> wrote: Art,
The individual mic and speaker connections are easy just follow this guide,?
However, if you're asking how to wire up your headset we would need more information regarding the plug on it and whether it has PTT capabilities or not. Joel? KB6QVI On Feb 2, 2017, at 3:04 PM, Art Olson via Groups.Io < olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
I found the drawing of the jacks we received. From the versions ours is the one with 5 contacts (XXXXX..4BH3) http://www.switchcraft.com/Drawings/35rapc__h3_cd.pdf
--
Ion VA3NOI
|
Your headset has 1 cable ,but has it also a single plug for both headphones and microphone ......or is the cable? partly split with separate plugs for headphones(green) and microphone (pink) ?
Frank , GM0CSZ / KN6WH
On Thu, Feb 2, 2017 at 11:04 PM, Art Olson via Groups.Io <olsonaj6927@...> wrote: Hello
looking for some help on how to wire up mic and earphone/speaker to Bitx40 using the 3.5 mm audio jacks it comes with. Do I use one for mic and the other earphone(headset)/speaker. I have a headset that has earphones and mic on one cable. Appreciate anyone response and help.
73 art N2AJO
|
Frank
Single cable
73 Art
Sent from my iPhone
toggle quoted message
Show quoted text
On Feb 3, 2017, at 6:14 AM, Frank Dinger,GM0CSZ < gm0csz@...> wrote: Your headset has 1 cable ,but has it also a single plug for both headphones and microphone ......or is the cable? partly split with separate plugs for headphones(green) and microphone (pink) ?
Frank , GM0CSZ / KN6WH
|
Joel Caulkins/N6ALT
Ion Petroianu, VA3NOI