开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. BITX20
  2. Topics

3d sBITX case V2

 

Hi,

Just released V2 of my sBitx case design. It now has mounting holes for a speaker (https://www.amazon.com/gp/product/B09R9WY9R6 and many other places) as well as support for Bob KD8CGH's tilting leg solution.



Available on thingiverse:


and my github

https://github.com/AJ6CU/3d-printer-models/tree/main/sBitx-v3-case

73
Mark

--
AJ6CU/7
KD8CEC 2.0, Nextion Screens,? and open source uBITX Raduino boards for Arduino IOT, BLE, RP2040, Teensy 4.0, and Raspberry Pi Pico
https://github.com/aj6cu
Owen Baldwin
 

Hi Mark, good job, well done, this will help a lot of people. As it's not metal, does it need to be screened with foil or something, or will there be no interference/noise issues as the main board itself doesn't have screening in between tx and rx components etc too? Just a thought.?
Owen G0RCL


On Wed, 24 Jan 2024 at 23:31, Mark Hatch <mark2382@...> wrote:
Hi,

Just released V2 of my sBitx case design. It now has mounting holes for a speaker ( and many other places) as well as support for Bob KD8CGH's tilting leg solution.



Available on thingiverse:


and my github



73
Mark

--
AJ6CU/7
KD8CEC 2.0, Nextion Screens,? and open source uBITX Raduino boards for Arduino IOT, BLE, RP2040, Teensy 4.0, and Raspberry Pi Pico
 

Owen,

I do not know...? On RX I do see mirror images on the spectrum, but had assumed this was some noise in my environment or some fine tuning that I needed to do. Perhaps a more experienced person will share his thoughts?

73
Mark
--
AJ6CU/7
KD8CEC 2.0, Nextion Screens,? and open source uBITX Raduino boards for Arduino IOT, BLE, RP2040, Teensy 4.0, and Raspberry Pi Pico
https://github.com/aj6cu

1 - 3 of 3