开云体育

The old Si351 library used only two arguments to the function. The latest library uses three arguments. Download and install the new library and close/restart the IDE. Jack, W8TEE To:

Sure. By "pull", do you mean remove? I was just trying to show a simple way of grabbing a few more bytes if someone needs them. Jack, W8TEE To: [email protected] Sent: Thursday, February 2, 2017

Thanks, Joel. How about others with the clicking? What kind of power supply and what is the voltage? Does the clicking happen on a battery? Some seem to minimize the issue by filtering the dc

Rob, Thanks for the info. I am an “Arduino Dummy” but I do know basically what you are talking about. I have a friend who can help with the programming. It guess it’s time for me to get

Hi Marco, I'm using a Alinco Linear 40 amp power supply at 13.8V. I have used batteries and other supply's with no clicks. Joel KB6QVI

Probably wrong SI5351 library installed -- Ion VA3NOI

Joel, What kind of power supply are you using with your radio? Switching, linear? What's the voltage? I am wondering if the radios with higher voltages (>13vdc) are the ones having the issue. My

can i pull these changes? - f [email protected]> wrote:

While compiling RADINO.INO I get the following error message *exit status 1* *no matching function for call to 'Si5351::set_freq(long long int, long long unsigned int, si5351_clock)'* * * What am

I hope ufd. Waiting patiently Sent from my iPhone

It is a genuine Bournes part for those that were wondering. Looks great and even came with the Allen key. Now if my box would only come in the mail we can start. Pic attached.

Hi Ken! Did you use 10 mfd or 10 ufd? -- Ion VA3NOI

I found the drawing of the jacks we received. From the versions ours is the one with 5 contacts (XXXXX..4BH3) http://www.switchcraft.com/Drawings/35rapc__h3_cd.pdf -- Ion VA3NOI

Joel Ok. I will give it a try and report back Thanks Art Sent from my iPhone

I have no clicks from my Raduino at all, even with the vol all the way up and the antenna disconnected I cannot hear any clicks while tuning. Strange that some do. Joel KB6QVI

Did you received a schematic with your kit? Can you post it? Is it the same schematic as the version with Raduino only using the coil? I will need the information to calculate new values for

Art, Usually the tip of the plug is the headphones, the sleeve, (the middle ring), is the mic, and the ring or the body of the plug is ground that is common to both, but I don't know how yours is

Rich, What I have to do every time Is to take a stereo plug that has not been used yet and plug it into the jack, then check each pin for continuity between the two and which pin of the jack goes to

I did a google and found a pin out that matched the pin lay out Pin 1 - common Pin 2 left audio to radio side Pin 3 left audio to receiver Pin 4 right audio to receiver Pin 5 audio to radio

Sent from Yahoo Mail on Android On Thu, 2 Feb, 2017 at 12:56 am, Giancarlo via Groups.Io<i7swx@...> wrote: Hi Farhan, thanks for the update. Herewith is the new