开云体育

Ian, ?Any chance of including the hex files so we can just upload with Xloader? Thanks! Mike WA3O

I'm thinking along the same lines.? I built a Mic amp version using the SSM2167 and thought it might work also for the Receiver. It's essentially the Sch seen on ebay but added a level pot on the

It's the Wiki link on the bottom of the left hand side list of links on every groups.io page. Click uBitx, then mods or software ??? Bob ? ? ? ? KD8CGH

Hi,? James I'm ready to help You.If need, open my portfolio in github.com/LZ1DPN 73! LZ1DPN ----------------------------------------James Lawrie 4:06 am? ?#41302??Ive been on this group for

Would probably have to use the 2 interrupts to read the encoder.? Do the frequency change in the interrupt, not set flag and process in main code. I did that with the regular (less pulses) encoder

Jose, It will not work right.? I have one and I connected it to my Raduino to actually test it (using my home made test set).? At 400 pulses per revolution of the shat, it sends pulses to the

/g/BITX20/wiki/home Marco - KG5PRT

I would be interested.? I have a lot of experience with all the above, and am currently retired.? I would welcome an opportunity to earn enough to fund my own projects.? Social security doesn't

Link? Roy WA0YMH

I've been adding to the uBitx Wiki as a way to find posts on mods and software. I urge software and hardware mods authors to keep the wiki current and for others to populate the trouble shooting wiki.

I personally haven’t tried the cat functions yet but I have been following the guy who made that addition in this group. I sold my bitx40 but I am waiting for a Ubitx to try it out with.

Here is the .35 release: https://github.com/phdlee/ubitx/releases Marco - KG5PRT

A voltage divider formed by a couple series resistors to ground placed on the signal of interest can be used to reduce the incoming voltage.? With that, the AD8307 could easily deal with higher RF

That could work fine as a high impedance probe for use with an oscilloscope or spectrum analyzer. To use it with a DVM you will need to add a diode RF probe or similar at the output, as what it sends

I am working on something similar for the microphone side with a SSM2167, and am doing a lot of thinking about how to do that on the RX side.? Someone recently used a programmable TI audio amp chip

Thanks for the reply Joe.? What version of the firmware you are using with CAT support, or is it your own? I see there is a github repository that uses a modified version of Allard's 1.24

Jose, I have one of those and it outputs 400 pulses/revolution.? This may present problems for the software to read properly as the standard uBITX encoder puts out about 24 pulses/revolution.? The

Hi, all! A link from where to download version 0.35, please! I found only 0.33! Regards, Emil

*This software is for the original uBITX Raduino with a standard (NOT the I2C) display. * *The zip file contains a complete, illustrated manual in PDF format that contains detailed instructions on

Hi DR fellows Just asking if anyone is thinking to change the rotary encoder of the uBITX to an optical encoder due the not good quality of the uBITX encoder.? can it is possible? I found this on