开云体育

I think OTOH that this problem is not due to your accidental interchange. CW is generated by the first mixer stage so it is something in the 2nd stage or later. Check BFO frequency and IF stage (2nd)

Hakan, Got it! the only severe damage could have been cause by PIN 3 +5v and 4 Gnd.. now this would have connected to volume ground and center variable pin. If the volume as at minimum as it would be

Raj, I did not shift the pins - I put the Raduino connector on the ubitx board and vice versa! And more: the CW part works with RF out. (Have not tested the SSB part yet.) And when I connect the

When I inserted the Raduino one pin to the left the raduino was toast! The damage depends how many pins did you shift left or right.. one of the pins has 12v and that would fry the Si chip or the

Why not keeping just one frequency like, 7177 which is common to both sides of the Atlantic and the other oceans?

John, I use an Arduino Nano AD9850 external vfo? with my Corsair II, that uses a free turning optical encoder and the Corsair digital display. Currently working on another version with a 20 x 4 lcd

What does local mean? A nearby station on medium wave, a station just above the 40 meters band or an FM broadcast?

Hi, I have successfully completed the microbitx construction. when I calibrate I could hear the strong signals from the local broadcasting station. I could not avoid it,though I hear the ham nets in

Yes the connector can only be plugged in one way, but the mistake I did was that I shifted the two connectors (for the uBITX board resp. the raduino board)

Would you switch off power and plug in the 8 pin like you did by mistake and take a photo for us? That would help troubleshoot. I am quite sure the connector can be plugged in only one way! Raj

Congratulations. And I can do all that without learning to write and compile GUI programs under Windows or Linux? Or this RPI OS you mention? Also, I prefer wxWidgets so you should use that instead.

Actually yes it did work out good for us. We can run the same Remote Control Program on any Windows, Linux, or RPI and control all the features of the uBITX. rOn

I used a USB soundcard, more because my laptop has a combined audio port for speaker/microphone. But just two 3.5-3.5mm cables from the soundcard to the speaker and the microphone connector of the

True but that wasn't the question. I'm sure your way works great for you though.

You can get an RPI-3 and a 5" color touchscreen for the price of the Nextion. Use fltk to design your UI and code in c. When you are done you can write code for many machines. With Nextion your stuck.

Direction connection from the ubitx speaker jack to the computer microphone input (windows10 works, and wsjt-x decodes FT8.?? Any suggestions on how to connect the line out (or headphone output)

Forgot to mention, I would rather only ship to the continental US.

I finally finished my bitx40 and realized that with a small city lot and small compromise antennas, QRP is not for me.? So I am selling my ubitx kit.? It is unused and the box was only opened to

With the Nextion display you don't draw buttons in code. There is a program that you run that you use to design the screens that are shown on the display. Then you are just passing data back and forth

I'd love to see versions capable of the 2200 meters and 630 meters. This would be awesome Joe WB9SBD Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com