¿ªÔÆÌåÓý

  1. BITX20
  2. Messages
Single Messages Topics Expanded Polls

Re: #ubitx-help #ubitx-help

 

I think OTOH that this problem is not due to your accidental interchange.

CW is generated by the first mixer stage so it is something in the 2nd stage or
later. Check BFO frequency and IF stage (2nd) for any bad solder and specially
check the T3-T7. Shake them gently and see if any change.

Raj

At 04/062018, you wrote:
Raj, I did not shift the pins - I put the Raduino connector on the ubitx board and vice versa!
And more: the CW part works with RF out. (Have not tested the SSB part yet.)
And when I connect the antenna the noice level increases. But I hear no signals what so ever, just birdies and background noise.
H?kan
Join [email protected] to automatically receive all group messages.