开云体育

Wack me again... (haven't finished my coffee!) ... it's in the files section here in a subfolder 'K6QV' Ben - K6QV

Wack me upside the head, should have thought of that ... I've uploaded the files I got... I cannot vouch that it makes a functioning uBitx, I can only vouch that a Chinese vendor used the files and

I have one of those kits that I decided not to use. It is just as received from Sunil, if interested, let me know. -- 72 and God bless KD4EPG

Ted, Thank-you for pointing that out.? I understand now that this is an alternate device, however I would have preferred not showing two devices in parallel on the schematic, with the pin out labeled

Thank you. The picture helps confirm I put the parts in the right places. Appreciate the clear picture. Harder to see on the manual copies. Dan. W3BU

I'll wager those extra final section reservations will accommodate a pair of? ?RD15HVF1, subject to checking pinout. I know they have 2 of the leads reversed as compared with the IRF510's.? The

Evan thanks for many thoughtful and useful posts here to this list.? they certainly have helped me.?? the 2 different PA's are alternatives (one of our local builders questioned the same thing).?

Not sure who is the correct person to send this to in a private email, so created a new thread for all to see. When I first started on the ubitx journey, I was often confused by the differences

Thanks, good suggestions all. I assume you do as much of the wire up as possible on the bench, and then put it in the case? [email protected]> wrote:

There were eight of them, and they were all the same size. Those look like the standoffs the come with the ubitx kit. I watched a video of a guy assembling that kit with a custom ubitx case, and he

I just went to eBay and searched for 10 turn 10k pots. This was recommended by somebody here to make tuning more precise. There are dozens of them. Same with the speaker, momentary switch and SO-239.

I know that this is an old thread, but it was never clear exactly what the files being converted were for...was this a conversion of the posted M0HYT thru-hole uBitx gerber files? From the tone of the

Just getting started on my 40. Is there a preferred pot? Would you please share the dealer and part number for the pot? Sam WY8V

Scott, I have test instruments that can do what you suggest but the majority dont. Diode detectors will only be useful in the later stages of the final amp as earlier stages run at minuscule signals

Hi Raj This is even more useful. Could we not measure those RF voltages with a regular RF probe (e.g., containing a germanium diode to rectify them to DC) and DVM, or an oscilloscope with bandwidth in

Just thought, I should have added this picture of a finished board, showing the parts nicely. Dang big picture. > > -- *k*

well, just because I can? ..I know "smart-ass answer", but I bought the ubitx to play with so ...and I don't like the sound with the clk0 running on it on AM Jim

with regards to what?

Also, I forgot, here is the board layout for the board that comes with the kit. I inly have the parts, but will put them on a perfboard. [image: image.png]

Here is the scematic. [image: image.png] -