开云体育

Dunno, I will check this. wrote:

Hi Allison - VFOs and now variable inductor VFOs have become a bit of a mania for me lately!? Thanks for the description of the mechanism but if you could post a picture it would be very helpful. I'm

Ashar, and all, I have yet to receive my upgrade kit. Anyone else not received theirs yet? --Neil, W2NDG? sBITX #69

Gian, Thanks. I will pass on the group's wishes and regards. [email protected]> wrote:

Hi Hashhar, very terrible news about Rahul. He was a very knowledged ham and shared his knowhow. RIP dear Rahul Please accept my condolences and pass these tohis family. Tnx & 73 GianI7SWX

David, Thanks. Let's see what our club will do.. - f [email protected]> wrote:

Ashhar, My sincere condolences. Always hard to grasp the loss of a good friend, and since he was an icon in the Amateur Radio Community, even more difficult,since his work and ideas live on. Maybe you

I have been having trouble with getting sbitx to receive.? I tried deleting my settings file with no luck.By accident I found that by running the software, closing it, and running again a second time

Rahul was the guy who took the ugly built original bitx20 and laid out the first pcb for it. It opened up homebrew ssb for hundreds if not thousands of hams. Sunil's boards are his designs. He was a

Thanks Mark, all is revealed at last..your help greatly appreciated. one day all will be clear, I hope cheers, Art G3XNE ________________________________ Sent: 15 September 2022 14:18 To:

Audio filters... first keep the RF out.? opamps are the ultimate solution as they can be applied to higher order filters with excellent performance. But when I go that far I like to add an audio

And suddenly the tx audio is back.. very strange. Codec in funky state? weird.. anyway, not popping the hood yet.. :-)

Hi All, was doing some initial testing with ssb today. I made a contact at 15w and the signal was good but the audio was not stellar.. so this morning I was doing some tests at lower power and

The "S" version is for the configuration with an extra nano that monitors, swr, s-meter, and decodes cw.? If you dont have that configuration, then you want the one without the "S". 73 Mark AJ6CU

Quick and dirty solution. Easy access to underside of pcb for removing burned fets and solder the new set. And best of all only 8 screws needs to be removed. de oz9ny, niels

*Jim, diversing,? can you say what the difference is in Ians firmware with the v1.200 hex files..? There are 2 of interest, but don't know which to * use *first one is uBITX_CEC_V1.200_nx.hex?

Thank you Allison for clear explanetions. Of course I compare Fahran's design with lot of similar on the web, and on similar TX boards usually they have 2 transistor and an IRF . 2 TX transistors are

Sound advice. I tend to put things on scrap paper and eventually lose it, bummer. Sent from Mail for Windows Sent: Wednesday, September 14, 2022 6:17 PM To: [email protected] Subject: Re: [BITX20]

Yes, I opened the top and ensured the boards were mated well.

Hi Glenn;Have you checked that the boards are all properly mated? A friend of mine received a fully assembled sBitx and had the same issue you are reporting - he was able to fix it by removing the top