开云体育

and two tone mode? works on tx ?????

WAS working ... now no audio... I checked the mic on another radio?? it is fine. There is 9v in the mic for the electret... any ideas where to start looking ??? could it be software ?? loaded k3ng

No sign of it here in Winnipeg Gerry Sherman Sent by the Thunderbird

I have been playing around with SDR software. I have found Quisk loads up and has a nice usable noise blanker in the code. It seems to perform well. Maybe something someone could copy and try? It also

Was it set below 80 mS? I find cwdelays below that to be problematic for both paddle and keyboard sending. I’m having a feeling of deja vu, all over again. I had a similar issue with my Arduino

Couldn't sleep until I found the issue. It was in the CW delay tme

Hi all, Sorry i was not very clear in my initial report. hamskey.com continues to be alive and well (and if anything were to happen to it, we could always get to it at the waybakcmachine.com ;-) The

Up here in the NE area I've been seeing for the last few days a lot of DNS fails and slow sites. Noo specific reports of outages but somethings is going on. Allison ------------------ Please use the

Hi Shawn, I’m not sure what may have messed up keyboard CW for you, but you may need to delete your user_settings.ini and/or grab fresh code from my git repo. The first method I was using to wake up

Something you changed wiped out the KBD CW. It just transmits garbage characters. A fresh reset to 1.1 stable brought back the ability to use the keyboard. Otherwise, stable so far. I really like how

Mark, its working here in indiana. Might be because there is alot of corn in the fields. Im surrounded by EARS.HI HI I went to hamskey.com brings up the original website 73Davidac9xh good thru

Thanks. By the way, if rotary encoder movement crashes sbitx, do another git pull. The original method I used for screen saver wakeup turned out to be horribly buggy. I’m using a different method

Thank you for this great work! Gordon

I have posted updated code. This includes: 1) Changes to \addcwpitch functionality, hopefully fixing the frequency errors folks found in testing. (Please test!) 2) Frequency calibration command \fc .

Dr Lee provided a qrcode based backup. By scanning a qr code with your phone your configuration. Would be backed up by a web service he set up. You could then restore the configuration from within

Mark, Not sure which sit you are referring to.? These two GitHub sites are working: https://github.com/phdlee/ubitx/releases/tag/v1.20 https://github.com/phdlee/ubitx/releases/tag/v1.11 Dr. Lee's

At least not working for me. Anybody else seeing this? 73 Mark

HI Mark I found one of my old nanos with the FTDI serial driver. I was able to upload using the old booyloader. 73 Ken

well, it looks like you are all over this Anthony. I'm not much of a programmer but impressed you are taking this stuff on! 73 Brad

Thank you for testing. Yes, I still experience the issue you’re having with DE. Sometimes it misses the E, or there’s D <hesitation> E. I’m still looking into this. The problem with paddle and