开云体育

Thank you for testing. Yes, I still experience the issue you’re having with DE. Sometimes it misses the E, or there’s D <hesitation> E. I’m still looking into this. The problem with paddle and

Anthony testing out your new code, and it's definitely better! It no longer drops the beginning dit or dah of a letter... when sending from the keyboard.. I previously pressed the space bar to

Thanks Farhan, just doing my due diligence making sure everything is correct before jumping in further.

The c31 has been removed as different clocks are used now. This is to avoid clocks leaking into each other. wrote:

* I believe I found it in the settings txt due to being in DEV mode....

Great question, Here is what I think happened. When I updated to 1.1, the first instance launched in DEV or DEBUG mode. There is an accompanying terminal window that automatically opens when the

Jerry and Evan, The original failure to read the eeprom was with the radio turned on and screen plugged in and powered usb cable plugged in (and the screen replaced with a nextion? ;-) ) 1. Used

Ashhar Patiently wait for my kit. No joy yet 73 Art N2AJO

Mark, If the v6 display is lugging down the Nano power supply to less than 5v, then the Nano may still sort of work but some functions (such as programming flash or eeprom) may fail. As Evan said:

Hi Ashar, I'd like to get a replacement switching regulator, please. Jason Johnston KC5HWB, Ham Radio 2.0 817-601-7228 | www.HamRadio2.com | jason@... <jason@...>

I searched to see if this topic has arisen before, but cannot find anything. I upgraded my uBITX with a Nextion screen and added the second Nano for the S-Meter upgrade. I have also added a second 5V

I ended up replacing both PA transistors and presumably will need to source more?IRFZ24Ns or equivalents for the future. The unit powered up without issue following replacing them. Now I'm on to

A pic of c31 missing.

I've noticed that C31 is missing from my circuit board which looks lo be a local power puddle reserve for U5 the LM380 amplifier. Is this normal? Also is there a layout/parts placement to help me with

ok, not Mike, Max.. sorry

H Mike, resonant antenna 1:1 and same with dummy load. thanks for the reply. This is a fully completed model. Not the kit.. Not sure if it's worth revisiting the bias settings or if there is just

Evan The radio wasn't turned on. ?I've tried uploading with the Nano in the radio and with it out. ?It uploads fine but doesn't function properly. 73 Howard

When programming the Nano, was it plugged into the Raduino, and was the radio turned on?? The v6 plus display uses a lot more power than the prior versions.? The Nano regulator may not be able to

Mark I uninstalled 1.8.4 and installed 1.18.19. I tried old bootloader and it did not load. I then tried new bootloader and it loaded fine without errors. I think my confusion is the supplier I

Hello Dave, I have also open a message on nanovna iso forum I think have a good method to test the filter see here: [email protected] | 2 poles filters teminaison impedance (