开云体育

Art, Ok, some bad news here. Running 1.2 on my V4 system, everything appears to work correctly, even the CW. My original problem was that the TX line got unplugged when I swapped the 2.8 screen

Hi All, I've been doing a lot of testing on the transmitted audio and getting a lot of RF on my signal above 5W or so. Has anyone experienced this?? ?I have been changing supplies, things like that

What type of mic is needed for the sBitx?? Does it need to be a electret capsule type or can a dynamic type be used?

I like it, but I bought it to tinker around with. I've blown the finals a couple of times (it's very picky about SWR and turning the power down to tune does not always actually lower the power output)

Received this afternoon, 9/16/2022 for sBITX #52! Thank you, Ashhar! -- Stephen, KO4CVU

Art, Quick report...? ?First, the TX button is not switchable on the UX. It just reflects what is going on. (So does the RX button). So that behavior is "normal". Hook up the microphone and click

Mark, How has your experience been with the sBitx so far? I just placed an order.

Art, Have a V6 set aside to duplicate this configuration. Unfortunately, knee deep in rewriting the uBitx Memory Manager at the moment... The symptoms are a little strange. Does the TX button light

Ok, I'm glad I'm not the only one seeing the spikes and bumps thing :) I've also resolve that by switching bands back and forth. -- KB3LYB sBitx #077

HI All, just installed a 2.8 nextion enhanced screen on my new v6 (kit)...added the screen Enhanced tft to the sd card (kingston 32 gb) new nano in place as kept original one for n8me

received? today?? sBitx#088?? danilo in3izq -- Questa email è stata esaminata alla ricerca di virus dal software antivirus Avast. www.avast.com

Hello everybody. I managed to install the sbitx software on a 64 gb sd, my device now works, and I try to learn the various commands. I have a question: but to put the software on a 32 gb sd how

Why is the coil wound that way with the ZL2PD PTO? I have seen that in other designs too. K3bo Sent from Mail for Windows Sent: Friday, September 16, 2022 3:46 AM To:

I’ve seen this issue and similar things remedied by a restart. A common one is where you’re tuning and the spectrum display and waterfall shows the same recurring pattern of spikes and bumps, but

Hi to all I started this tread to share infos about the best simple inexpensive way to build the PTO coil without a 3D printer ( the way used by Farhan). ...and now we are talking about philosophy,

Restarting the sBitx software seems to have fixed it. I am comparing my listening with ICOM's IC-705 on CW, and the sBitx shows a lower frequency by about 600 Hz. Ichiro,JE1JGC

I don't want to go any further with mine without knowing if this is the proper bias process or if I have a problem I need to troubleshoot. Anyone have any ideas? -- KB3LYB sBitx #077

I have had this happen twice and restarting the sbitx software fixed it. Is this consistently happening to you? -- KB3LYB sBitx #077

Nothing received in Winnipeg for #64 Gerry Sent by the Thunderbird

Haven’t gotten mine for sBITX #52. -- Stephen, KO4CVU