开云体育

Jamey: I have been buying displays from BuyDisplay.com for several years now. They have good prices (i.e., a 2.8" TFT display is under $18) and reasonably fast shipping. We are using their 5"

Thank you. Yes, I have read from VU2ESE that the there is no more room on the Arduino. I found a pretty reasonable priced Nextion 2.8” (for USA, anyway) at RobotShop.com . [RobotShop

As one can see from the picture, the SD card socket is not connected to anything. It's there because the original design it's cloned from had one and it has stayed. It does allow having images and

Here is something I never noticed before. The standard V6.1, 2.8 IN. screen has a memory socket similar to Nextion 2.8 screen. Can the standard screen hold a more elaborate program similar to the

Rahul, he's talking about the connector for Audio IO, he's not talking about the interface or Audio card. Charudatt - VU2UPX [email protected]> wrote:

RaviSimply connect a 100 buck usb sound dongle.. Works well ie abt 1 odd or so in terms of GBP

Yes This Digikit i bought for uBiTX few years back Works nicely wrote:

A simple TRRS socket should be fine. If you need any fancy connector , it's your choice. For Audio out a tap-off from the buffer amp output to the volume pot input should be fine. Mic input seems

i have my "home norm " ... all in RCA (chinch) ... and for commercial rigs i make adaptor cables (acc connector one end ... rca coupler to other end) that way you can nonnect a "normal" 3.5 mm to rca

Hi, I'm considering setting up a connector for Digital modes, preferably on the back panel What are peoples thoughts on how I should structure it? Should I use a standard such as the Yaesu one and

Hey Jerry, I just checked - I had a kit made up so I just pulled the board & replaced it with one that didn't have a VFO chip soldered on it. I can ship it as quick as the PayPal gets here - Wife

Hi Jerry, Yes, I do have them. I can drop $5 off the total for one without the VFO chip total $35 shipped (normally $35+5 shipping). PayPal the $35 (friends & family please) to w0eb@... and I

Hi Jim, Do you have the Teensy 4.1 Raduino kit in stock? I'd like to buy another one. If it helps, I don't need the VFO chip. As you may remember, I bought two of them from you. One is in

Gary, it is a similar bird hunt in connection with another device. The topic could not be closed. Link: 160m_qcxmini_rx_birdies ( /g/QRPLabs/topic/160m_qcxmini_rx_birdies/89214914

Yes the raduino fits when plugged in either too far to the right or left. Bought a used uBITX that was assembled wrong. The result was that the raduino was toast -- 73 Dave ADOB (

I wouldn't adjust contrast, if it was out then the receiver would work at default freq.

can the contrast be out of adjustment?

The white screen simply means that either: 1. The display is bust (unlikely) 2. The display connector is not properly in contact with the rest of the raduino. 3. The Arduino is loose. 4. The Arduino

Andy, send detailed pictures if you can of all the connections.? Firm doesn't mean it's plugged in correctly per Raj's advice. The Nano is not only built upside down for historical reasons, but could

Bright white screen is bad news. Check that the arduino is sitting properly. - f [email protected]> wrote: