开云体育

I don't have instruments just LCR frequency meter- Tip RF- only basic wattmeter was more from experience in assemblies that I adjusted and it was very good at 40m voce pode de add no Whatzapp

yea all voltage measurements seem fine as per the chart. Do you have a CRO and can you help with 1)Waveforms of BFO and VFO individually 2)Can you change VFO and see whether BFO changes and vice a

Hello everyone, I already configured the 3 E-bitx all working very well. They were assembled strictly in accordance with the manual and prior to the placement of the BPF and the toroidal inductors

Hi John, I was indeed worried about this. The box is pretty big compared to the amp & LPF boards, and I might just solder up an internal box made of PC board stock. Thought I might just put it

Hi Jerry, What are you doing for shielding? Are you using conductive filament or a metal box inside the enclosure? I found the Chinese boards to radiate all kind of junk through the wiring and from

E.BITX is easy bitx. Sunil I am pretty comfortable with coding. Thanks for pointing out the different IF frequencies Are there any people around who have used E.Bitx with its stock firmware and got

All, Attached pic is my 3D printer making a case for my tiny linear. The case is a equal in size to the uBITX, and will have a touch screen just like the uBITX. Actually, the touch screen was left

Allard's Bitx40 sketch is closer than the AK2B sketch. But the pin numbers are all wrong, and the Bitx40 has a pot instead of an encoder. The Bitx40 IF is at 12mhz instead of 10mhz, assumes there is a

why not use sketch from Allard PE1NW see details here http://ubitx.net/category/bitx40/ and download it from here (and find further info for wire up, hints and kinks, moddings)

Sunil's Easy Bitx is not a bad choice. A single band SSB rig for under half the price of a uBitx. Simple, mostly through hole parts, a good project for those wanting the complete kit building

I'm guessing this is the Easy Bitx from InKits: https://amateurradiokits.in/easy-bitx-version-1/ and that it uses the Si5351 PLL chip for VFO and BFO. It would be very odd if the BFO moved around

I may be out of the loop on this one, exactly what is an E.Bitx? Can you point to a manual? What DDS chip? Do you have source code for the DDS? There are several different kits coming out of India,

Hello friends Any place I can find DC/RF voltage measurement ubitx v6 summary. De VU2UPX

Hello friends and gurus, I am building a E.Bitx purchased from India and here are the symptoms 1) VFO frequency =? BFO frequency? +-few Khz produces a strong radio like static when Q3 base is

Here's an earlier version of the circuit: https://hackaday.com/2014/06/29/automatic-audio-leveling-circuit-makes-scanning-more-fun/ It is designed to be used with no mods to the radio, just connect

Hello, yesterday I received, built and already oeprated a brand new uBitx v6. It is a great radio and I instantly had a few QSOs with stations in Denmark, Bosnia, Austria, Poland and Wales on 40m.

If you don't have a spectrum analyzer, buying a TinySA will give you ample of instrumentation to improve your Ubitx. Just make sure you are buying an original not a clone, the clones are not worth

Hello, As previously said I have a noise in the audio (Tic tac style) at each SDA pulse. I did a lot of testing and I came to the conclusion, that in fact there must be some interference (Style

If you are new here you probably have no idea what I am shouting about.? In addition to this list, we have a map at bitxmap.com ( http://bitxmap.com ) where you can mark your location and see the

Sorry, I forgot to mention the load capacitance for those $0.10 crystals from Tayda. They are spec'd on the website at 16 pF. I have absolutely no idea (or any way to measure) the actual load