Allard's Bitx40 sketch is closer than the AK2B sketch.
But the pin numbers are all wrong, and the Bitx40 has a pot instead of an encoder.
The Bitx40 IF is at 12mhz instead of 10mhz, assumes there is a function switch.
Would be an easy enough transition for somebody who knows what they are doing,
would be nearly impossible for somebody who doesn't.
The InKits manual says the code is open source.
Should be posted somewhere, perhaps it is but I haven't found it.
Jerry, KE7ER
On Tue, May 18, 2021 at 01:48 PM, Siegfried Jackstien wrote:
why not use sketch from Allard PE1NW
see details here
and download it from here (and find further info for wire up, hints and kinks, moddings)
it even has a capacitive touch sensor for cw added (on TWO pins so no problems with sending dit dah instead of dit)
and other useful things (example usb added on the 40m unit to be used with digi modes, a second vfo for "split", etc etc)
greetz sigi dg9bfc
