开云体育

Eureka!!!! I had never tried the “Old Bootloader” version of the ATMega328 and now with all the other things are setup properly it up loaded with no errors. Guess that means that the software has

That reference to *trying to sync an STK500* board is interesting. Big difference between the Nano and a very old (extinct...?) STK500 development board. _._ wrote:

Ted, I did get the picture that time.? From it I would surmise 2 things: 1 - That you do have an HF Signals Raduino with a Nano Clone. 2 - That the Nano is soldered in on the opposite side of the

Begin forwarded message: From: bevtedstan@...<mailto:bevtedstan@...> Date: July 29, 2020 at 10:45:25 AM PDT To: Bev <bevtedstan@...<mailto:bevtedstan@...>> Subject:

Yes, the ATMega328P (Old Bootloader) for the Processor.

you need to save the picture to a file, then upload the file.

For some reason, I do not see the picture.

Don’t know how this Group.IO stuff works so hope all see my msgs. 73 Ted I appreciate all your efforts.!!! Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Sent:

I think the Raduino is the name given to the display interface, which includes the Nano and the LCD display. If you are using software to upload to the Nano, Nano is the correct choice for the upload.

Begin forwarded message: From: BevTed Stanier <bevtedstan@...<mailto:bevtedstan@...>> Date: July 29, 2020 at 10:45:28 AM PDT To: BevTed Stanier

I did unplug the Nano from everything else and no change. Processors are ATMega328p, ATMega328p(Old Bootloader) and ATMega168 ATMega328p is selected. Should I try old bootloader?? Don’t see anything

Yup that was set okay. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Sent: Wednesday, July 29, 2020 9:58 AM To: [email protected]<mailto:[email protected]> Subject: Re:

Cable checks okay for continuity. Got verbose error msg. Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P" Sketch uses 22966 bytes (74%) of program storage space. Maximum is 30720 bytes.

Ted, Do as Allard suggested before purchasing anything. 73 Evan AC9TU

Ted, Can you verify that you have a Nano clone?? It could be that you have a Raduino that is not from HF Signals.? HF Signals uses Nano clones with the CH340 series of USB interfaces.? The

Ted, also make sure to select "AVRISP mkll" under Tools => Programmer 73 Allard PE1NWL

Evan Okay Comport set as you suggested. For some reason “Com&LPT” did not appear on Device Manager until I plugged in My Navigator and then the Nano. Something I set when setting the Navigator up,

Evan Yes using Windows 10. Looks like I messed up the Comport setup but got the rest okay. Now getting a sync error when uploading so will go back and redo the Comport as you suggest. Will let you

Ted, pick your flavor. https://amateurradiokits.in/store/printed-circuit-boards/ 72,73 de KC8CKZ

Is the bitx40 still available, or long gone?? I have a project in mind for one if theres a spare board or kit floating around. -ted